PowerEdge
systems with PERC S100 require S100 drivers during operating system
installation
Description
The system reboots when you install the Windows Server
OS by using the ROK media or the Unified Server Configurator
(USC), on the PowerEdge RAID Controller (PERC) S100.
Workaround
To install OS, use the external USB-DVD drive.
NOTE: This issue is fixed
in Windows Server 2008 R2 Service Pack 1. A message may be displayed
to install the driver, because the S100 driver is not available with
Windows Server 2008 R2 Service Pack 1 OS. Download and use the latest
drivers from Dell.com/support/drivers. For more information, see Downloading the drivers and firmware.
NOTE: Dell software RAID
S100 and S300 are not supported on Windows Server 2016, Windows Server 2012 and Windows Server 2012 R2.
Los datos no están disponibles para el tema
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"