WinPing is used to start the Windows Packet
Internet Groper (PING) diagnostic utility and view the result of echo
request sent to a network host.
To open the
Dell Wyse WinPing dialog box:
WinPing is a diagnostic
tool that sends an echo request to a network host. The host parameter
is either a valid host name or an IP address. If the host is operational
and on the network, it responds to the echo request. The default is
to send three echo requests and then stop if no response is detected.
WinPing sends one echo request per second, calculates round-trip times
and packet loss statistics, and displays a brief summary upon completion.
Click Start > Run.
Enter the WinPing in the Open box,
and then click OK
The Dell Wyse WinPing dialog box is displayed.
Enter a valid IP address in the IP address
box.
In the Retries box, type or select
the number of echo requests you want to send out to the network lost.
Click Ping.
WinPing sends one echo request per second, calculates
round-trip times and packet loss statistics, and displays a brief
summary under the Status section on the dialog box upon completion.
Los datos no están disponibles para el tema
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"