Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell Wyse ThinLinux 1.0.3 Administrator’s Guide

PDF

HAgent

WDM is a device management solution which helps you to manage cloud clients securely from remote infrastructure. WDM management solution involves both server and client components where client software also known as HAgent should be installed on each thin client device for management through WDM.
Figure 1. HAgent Settings
  1. On Wyse Device Manager (HAgent) page, enter the Wyse Device Manager Server name in input box.
  2. The following options can be configured. This is an admin only configuration in the thin client.
    Table 1. Wyse Device Manager Server . The following table lists the different parameters:
    ParameterDescription
    Enable Auto Device DiscoveryClick the ON/OFF button to enable or disable this option.

    This option enables or disables the discovery of Thin Clients by DNS Hostname , DNS SRV record Lookup , DHCP option Tags.

    DNS HostnameClick the ON/OFF button to enable or disable this option.

    This option will take effect if Enable Auto Device Discovery is in OFF state. When this option is in ON state, then the clients are discoverable using DNS Host name.

    DNS SRV record Lookup Click the ON/OFF button to enable or disable this option.

    Auto Device Discovery is in OFF state. When this option is in ON state, then the clients are discoverable using DNS SRV record lookup.

    DHCP option TagsClick the ON/OFF button to enable or disable this option.

    This option will take effect if Enable Auto Device Discovery is in OFF state. When this option is in ON state, then the clients are discoverable using DHCP options Tags.

    Manual Discovery From WDMClick the ON/OFF button to enable or disable this option.

    If this option is enabled, the WDM server will be able to discover the client through manual discovery.

    Auto Discovery after missed checkinsEnter the Auto Discovery after missed checkins.

    The allowable number of missed check-in attempts before going for auto discovery of Wyse Device Manager.

  3. Click Save to save the changes.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"