Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s RACADM CLI Guide

setchassisname

Table 1. Details of setchassisname. The following table provides the details of setchassisname attribute:
Description	Sets the name of the chassis. To use this subcommand, you must have the Administrator privilege. NOTE: The special characters " (double quote), ` (back quote), & (ampersand), > (greater than), < (less than), and \ (backslash) are not supported for this subcommand.
Synopsis	racadm setchassisname < name> NOTE: Chassis name is a maximum of 64 unextended ASCII characters.
Example	racadm setchassisname dellchassis-1 The chassis name was set successfully.