Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell Wyse Windows 10 IoT Enterprise for Latitude 5280 Mobile Thin Client BIOS Upgrade Guide

PDF

Upgrading the BIOS by using the SCCM server

  • NOTE: Ensure that you use SCCM server 2016 R2 or later
To create a package, do the following:
  1. Download the WDM BIOS package from support.dell.com
  2. In Configuration Manager Content Source Share , create a folder with the name Packages.
  3. Copy the installation package to the Packages folder.
  4. Open the System Centre Configuration Manager console and go to Software Library > Application Management > Packages.
  5. Click Packages and select Create Package . The WDM screen is displayed.
    Figure 1. WDM Interface
    The Create Package and Program Wizard screen is displayed.
    Figure 2. Create Package and Program Wizard
  6. Click Next. The Program Type screen is displayed.
    Figure 3. Program Type
  7. Select Standard Program and click Next. The Standard Program screen is displayed.
    Figure 4. Standard Program
  8. In the Standard Program package, enter the package name.
  9. In the Command Line field navigate to the folder where the BIOS executable file is located, and select it.
  10. Click Next to continue. The Requirements screen is displayed.
    Figure 5. Requirements
  11. Click Next to continue. The Summary screen is displayed.
    Figure 6. Summary
  12. Verify whether all the information is correct.
  13. Click Next to continue. The Completion screen is displayed.
    Figure 7. Completion
  14. Click Close.
  15. Right-click the package created, and select Distribute Content.
    Figure 8. Distribute Content
  16. After the package content is distributed, check if the status of the package turns green.
  17. Add the client to the domain and verify if it is displayed on the SCCM server screen.
  18. In the target client where you want to upgrade the BIOS, go to Assets and compliance > devices and check the MAC id of the client. Add the device to the device collection.
  19. Deploy the BIOS package to the created device collection. The client restarts and upgrades the BIOS.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"