Disconnect the LVDS cable from the system board [3].
Place the computer at the edge of a table as shown and remove the six M2.5x5 screws [1] securing the display assembly to the computer. Then, lift the display assembly off the computer [2].
Los datos no están disponibles para el tema
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"