The following issues were fixed in FluidFS v6.0.110054:
Area | Description |
---|---|
Account Management and Authentication | The preferred Domain Controller setting was not strictly enforced. |
Duplicate iSCSI IP addresses were falsely reported on multiple-appliance iSCSI systems. | |
Data Protection | Following a Firmware update from v5 to v6, incremental NDMP backups failed frequently. |
NetVault backups could not be partially restored after a firmware update to version 5.0.300109. | |
SACL events were not displayed in Dell Storage Manager, but could be seen when using the CLI. | |
In rare cases, replication from FluidFS v5 to FluidFS v6 failed. | |
Creating duplicate share names was not always rejected. | |
Copying or cloning files using VAAI might not have worked on non-default tenants. | |
Quota directory did not apply size change following a NFSv4 move operation. | |
When a hard quota was exceeded, writes to existing file was truncated but did not generate an error. | |
User started Dell Storage Manager in English and switched to another language. After resizing a NAS volume, displaying NAS volumes generated a non-English popup message. | |
User could not edit folder security permissions using Dell Storage Manager 2016 R3. | |
Sometimes, snapshots could not be deleted using the GUI or the CLI. | |
System Management | The standby controller did not reattach to the cluster after replacement. |
The cluster status wrongly showed critical when the Admin subnet state was enabled or restricted, but was configured to use the client network. | |
During a battery calibration cycle, the following alert was falsely generated: BPS on NAS controller X is not operating properly. Battery reports failed state. | |
After a Firmware update to v6, the following event was falsely generated: The forced battery cycle in NAS controller X is no longer required. | |
After a Firmware update to v6, capacity trends and statistics only showed 48 hours of historical data. |