Dell Wyse Windows 10 IoT Enterprise for Wyse 5060 Thin Client Administrator’s Guide

Configuring vWorkspace Farm

1. Click vWorkspace Farm to view the configuration options available.
   If you are successfully connected to the vWorkspace Farm, then the status of the connection is displayed in green color.
2. Click the Settings icon to configure your vWorkspace Farm settings.
   1. Select the Automatically connect to this configuration on startup check box to allow auto-connect to the specified configuration upon startup.
   2. From the drop-down list, select your location where you want to deploy the vWorkspace Farm. The available options are:
      • Always prompt for location

      • Use Location Inside Office

      • Use Location Outside Office

   3. Under the Display settings section, the following options can be configured.
      • From the Screen resolution drop-down list, select your preferred screen resolution for your vWorkspace session.
      • Select the following check boxes as per your requirements:

        • Use all my monitors for the remote session

        • Display connection bar

        • Pin connection bar

   4. Under the Device settings section, the following options can be configured.
      • Select the following check boxes as per your requirements:
        • Play audio

        • Use USB devices

        • Use microphone

      • Click More Devices to select additional devices and resources on your computer that you want to use in your remote session.

3. Click OK to save your settings.
4. Click the Delete icon, if you want to delete the configured vWorkspace Farm.
5. Click the Info icon to view the Name, Type, and Timestamp of your vWorkspace Farm.