Omitir para ir al contenido principal
Cerrar

Bienvenido a Dell

Mi cuenta
  • Hacer pedidos rápida y fácilmente
  • Ver pedidos y realizar seguimiento al estado del envío
  • Cree y acceda a una lista de sus productos
  • Administre sus sitios, productos y contactos de nivel de producto de Dell EMC con Administración de la empresa.
Iniciar sesión Crear una cuenta Clientes Premier Iniciar sesión en el programa para partners
Contáctenos

Dell PowerEdge R730 Owner's Manual

PDF

Troubleshooting a storage controller

CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.
NOTE: When troubleshooting a controller, see the documentation for your operating system and the controller.
NOTE: Mini-PERC socket is not hot-pluggable.
  1. Run the appropriate diagnostic test. See the Using system diagnostics section.
  2. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
  3. Remove the system cover.
  4. Verify that the installed expansion cards are compliant with the expansion card installation guidelines.
  5. Ensure that each expansion card is firmly seated in its connector.
  6. Install the system cover.
  7. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
  8. If the problem is not resolved, turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
  9. Remove the system cover.
  10. Remove all expansion cards installed in the system.
  11. Install the system cover.
  12. Reconnect the system to the electrical outlet, and turn on the system and attached peripherals.
  13. Run the appropriate diagnostic test. See the Using system diagnostics section.

    If the tests fail, see the Getting help section.

  14. For each expansion card you removed in step 10, perform the following steps:
    1. Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.
    2. Remove the system cover.
    3. Reinstall one of the expansion cards.
    4. Install the system cover.
    5. Run the appropriate diagnostic test. See the Using system diagnostics section.

If the problem persists, see the Getting help section.

Califique este contenido

Preciso
Útil
Fácil de comprender
¿Este artículo fue útil?
0/3000 characters
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Proporcione calificaciones (1 a 5 estrellas).
  Seleccione si el artículo fue útil o no.
  Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"