Active System Manager Release 8.2 User’s Guide

The Networks page displays information about networks defined in ASM, including:

• Name

• Description

• Network Type

• VLAN ID

• IP Address Setting

• Starting IP Address

• Ending IP Address

• IP Addresses in Use

  • NOTE: IP Address in Use indicates number of IPs are in use out of available IPs.

On the Networks page, you can:

• Define or edit an existing network. For more information on define or editing an existing network, see Defining or editing existing network .

• Delete an existing network. For more information on deleting an existing network, see Deleting a network.

• Click Export All to export all the network details to a .csv file.

• Export network details for a specific network. To export the specific network details, select a network, and then click Export Network Details.

Also, you can click a network to see the following details in the Summary tab:

• Name of the user who created and modified the network.

• Date and time that the network was created and last modified.

If you select a network from Networks list under Settings, the details of the network are displayed below.

For a static network following information are displayed:

• Subnet Mask

• Gateway

• Primary DNS

• Secondary DNS

• DNS Suffix

• Last Updated By

• Date Last Updated

• Created By

• Date Created

• Static IP Details

For a DHCP network following information are displayed:

• Last Updated By

• Date Last Updated

• Created By

• Date Created

You can filter the IPs by selecting any of the following options from the View drop-down menu, under the Static IP Address Details section:

• ALL IP Addresses

• IP Addressees in Use

• Available IP Addresses