Hold the system board at the center. Avoid holding the system board by the "neck" area to avoid damaging it.
Replace the M2x4 (4) screws that secure the system board to the palm-rest assembly.
Angle the system board onto the palm-rest assembly with the SD-card slot side. Angling it this way while mounting the system board gives sufficient clearance as the audio daughter-board is beneath the other side of the system board.
Connect the power-adapter port cable, speaker cable, keyboard-control board cable, touchpad cable, and touch-screen cable to the system board.
Connect the display cable to the system board.
Align the display-cable bracket with the screw hole on the system board and replace the screw (2).
Install the components as per the process.
Follow the procedures in After working inside your computer..
Los datos no están disponibles para el tema
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Proporcione calificaciones (1 a 5 estrellas).
Seleccione si el artículo fue útil o no.
Los comentarios no pueden contener estos caracteres especiales: <>"(", ")", "\"