Microsoft Windows 10 IoT Enterprise for Dell Wyse Thin Clients Administrator’s Guide

To configure the wireless local area network settings, use Setup a new connection or network window, if wireless support is allowed on the thin client device.

1. Log in as an administrator.
2. Go to Start > Control Panel > Network and Sharing Center > Setup a new connection or network . You can also select the Open network, and sharing session on the taskbar that appears on the Thin Client Administrator Desktop.
3. In the Setup a new connection or network window, select Manually Connect to Wireless Network .
4. Click Next.
5. In the dialog box, enter the following:
   • Network Name
   • Security type
   • Encryption type
   • Security key
   • NOTE: Depending on the authentication, enter the security key.
6. Select the Start this connection automatically check box.
7. On the taskbar, select the Open network and sharing session and the name of the network which you entered.
8. Select Connect.
   • NOTE: You can also view the network available and directly connect from the Open network and sharing session on the taskbar of the Thin Client Administrator Desktop.