Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Latitude 3180 Owner's Manual

Updating the BIOS in Windows

It is recommended to update your BIOS (System Setup), when you replace the system board or if an update is available.
NOTE: If BitLocker is enabled, it must be suspended prior to updating the system BIOS, and then re-enabled after the BIOS update is completed.
  1. Restart the computer.
  2. Go to Dell.com/support.
    • Enter the Service Tag or Express Service Code and click Submit.
    • Click Detect Product and follow the instructions on screen.
  3. If you are unable to detect or find the Service Tag, click Choose from all products.
  4. Choose the Products category from the list.
    NOTE: Choose the appropriate category to reach the product page
  5. Select your computer model and the Product Support page of your computer appears.
  6. Click Get drivers and click Drivers and Downloads.
    The Drivers and Downloads section opens.
  7. Click Find it myself.
  8. Click BIOS to view the BIOS versions.
  9. Identify the latest BIOS file and click Download.
  10. Select your preferred download method in the Please select your download method below window, click Download File.
    The File Download window appears.
  11. Click Save to save the file on your computer.
  12. Click Run to install the updated BIOS settings on your computer.
    Follow the instructions on the screen.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\