Dell OpenManage Deployment Toolkit Version 4.3 User's Guide

Running The SYSCAP.BAT Or Syscap.sh

To run the SYSCAP.BAT or syscap.sh sample script to capture the BIOS and BMC configuration information in the syscfg.ini file:

Edit the startnet.cmd file (on your Windows PE image) or start-up script file (on your embedded Linux image) to call the SYSCAP.BAT or syscap.sh script after the network share with the pre-built DTK directory structure is mounted. For example, add: On systems running Windows:
```
call Z:\Dell\Toolkit\Template\Scripts\SYSCAP.BAT
```
On systems running Linux:
```
/opt/dell/toolkit/template/scripts /syscap.sh
```
Boot the source system into Windows PE or embedded Linux. The script runs and saves the configuration information in the \Toolkit\Systems\<target system> directory in Windows and /opt/dell/toolkit/systems/<target system> directory in Linux.
Edit the startnet.cmd file (Windows PE image) or start-up script file (embedded Linux image) to remove the text you added in step 1.
- NOTE: For 9G or later systems, raccap.sh and syscap.sh have duplicate functions. If you run raccap.sh followed by syscap.sh, the latter overwrites settings of the former.