System Setup
enables you to manage your computer hardware and specify BIOS‐level
options. From the System Setup, you can:
Change the NVRAM settings after you add or remove hardware
View the system hardware configuration
Enable or disable integrated devices
Set performance and power management thresholds
Manage your computer security
To access the system setup options (BIOS):
Connect your tablet to the keyboard dock or connect a USB enabled
keyboard to your tablet.
Press the
Power button to
turn on your tablet or restart your tablet, if you have already turned
on your tablet.
Press
F2 after the Dell logo appears.
NOTE: You
might have to press
F2 repeatedly until the Windows redirects
to the system setup options.
To access the setup options
(BIOS) without an external keyboard :
Press the
Power button to
turn on your tablet or restart your tablet, if you have already turned
on your tablet.
Press and hold the
Volume Up button when the Dell logo
appears on the screen.
When the F12 Boot Selection menu appears, press the
Volume
Up
button to change the boot selection to the BIOS Setup option.
NOTE: The
Volume Up button cycles through the menu options (Boot
Options, BIOS Setup, Diagnostics, and so on. You can select the desired
option by pressing the
Volume Up button.)
Press the
Volume Down button to select the option.
Les données de cette rubrique ne sont pas disponibles
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez attribuer une note (1 à 5 étoiles).
Veuillez indiquer si l’article a été utile ou non.
Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\