Reference Guide Dell Wyse ThinOS Release 8.3.1 – INI Files

System Variables

Table 1 contains the System Variables you can use with some options of the Connect Parameter:

Table 1. System Variables
Option	Value
$SN	Serial number used.
$MAC	MAC address used.
$IP	IP Address used.
$TN	Terminal name.
$PF	Platform name—The first part of image name xxx_wnos, for example, R10L.
$UN	Sign-on name used.
$PW	Sign-on password used.
$DN	Sign-on domain name used.
$FIP	IP address used in fixed format with 3 digits between separators, for example, 010.020.030.040.ini. Using it in conjunction with the left/right modifier helps to define policy for subnet. For example, include=&Left($FIP,11).ini is specified to include file 010.020.030.ini for subnet 010.020.030.xxx.
$WPUN	PEAP/MSCHAPv2 username used (802.1x dependent).
$WPPW	PEAP/MSCHAPv2 password used (802.1x dependent).
$WPDN	PEAP/MSCHAPv2 domain used (802.1x dependent).
&Right($xx, i) or &Left($xx, i)	Specifies whether the variable is to be read from left or right. The $xx is any of the above parameters. The parameter i specifies left or right offset digits.