Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits

XPS 13 Service Manual

Procedure

  1. Open the latch and disconnect the touchpad cable from the system board.
  2. Peel off the touchpad cable from the keyboard and palm-rest assembly.
    Figure 1. Removing the touchpad cableImage: Disconnecting the touch-pad cable.
    1. latch
    2. touchpad cable
  3. Remove the four screws (M2x2) that secure the touchpad to the palm-rest assembly. If applicable, peel off any foam adhering the touchpad to the palm-rest assembly.
  4. Lift the touchpad from the inner edge and remove it from the palm-rest assembly.
    Figure 2. Removing the touchpadImage: Removing the touch pad.
    1. screws (4)
    2. palm-rest assembly
    3. touchpad

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\