- Notes, cautions, and warnings
- About this document
- PowerEdge XR5610 system configurations and features
- System configurations - front view for PowerEdge XR5610
- System configurations - rear view for PowerEdge XR5610
- Bezel view
- Status LED control panel
- Power button control panel
- System configurations - inside view for PowerEdge XR5610
- Locating the Express Service Code and Service Tag
- System information labels
- Rail sizing and rack compatibility matrix
- Technical specifications
- Chassis dimensions
- System weight
- Processor specifications
- PSU specifications
- Supported operating systems
- Cooling fans specifications
- System battery specifications
- Expansion card riser specifications
- Memory specifications
- Storage controller specifications
- Drives specifications
- Ports and connectors specifications
- Video specifications
- Environmental specifications
- Initial system setup and configuration
- Pre-operating system management applications
- System Setup
- Dell Lifecycle Controller
- Boot Manager
- PXE boot
- Minimum to POST and system management configuration validation
- Disassembly and reassembly
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- Front bezel
- Bezel filter
- System cover
- Air shroud
- Cooling fans
- Intrusion switch
- Drives
- Drive backplane
- Cable routing
- System memory
- Processor and heat sink module
- Removing the processor and heat sink module
- Removing the processor and extended heat sink module
- Removing the processor from the processor heat sink module
- Installing the processor into a processor heat sink module
- Installing the processor and heat sink module
- Installing the processor and extended heat sink module
- Expansion cards and expansion card risers
- Expansion card installation guidelines
- Removing the expansion card risers
- Installing the expansion card risers
- Removing an expansion card from the expansion card riser
- Installing an expansion card into the expansion card riser
- Removing a Telco L1 expansion card from the expansion card riser
- Installing a Telco L1 expansion card into the expansion card riser
- M.2 SSD module
- System battery
- Power supply unit
- Power distribution board
- Optional OCP NIC card
- System board
- Trusted Platform Module
- Control panel
- Removing the status LED control panel for Rear Accessed configuration
- Installing the status LED control panel for Rear Accessed configuration
- Removing the status LED control panel for Front Accessed configuration
- Installing the status LED control panel for Front Accessed configuration
- Removing the power button control panel for Rear Accessed configuration
- Installing the power button control panel for Rear Accessed configuration
- Removing the power button control panel for Front Accessed configuration
- Installing the power button control panel for Front Accessed configuration
- Ruggedization Kit
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Dell PowerEdge XR5610 Installation and Service Manual
About this document
This document provides an overview about the system, information about installing and replacing components, diagnostic tools, and guidelines to be followed while installing certain components.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\