Avançar para o conteúdo principal
  • Efetuar encomendas de forma rápida e fácil
  • Ver todas as encomendas e controlar o seu estado de expedição
  • Criar e aceder a uma lista dos seus produtos
  • Gerencie seus sites, produtos e contatos de nível de produto da Dell EMC usando o Company Administration.

Dell Storage with Microsoft Storage Spaces Cabling Guide

PDF

Server and enclosure port numbering

The following figures show the enumeration of the ports on the HBAs within the server.
Figure 1. Rear view of DSMS 630 server showing location of HBA ports This image shows rear view of DSMS 630 server showing location of HBA ports.
Figure 2. Rear view of DSMS 730 server showing location of HBA ports This image shows the rear view of DSMS 730 server showing location of HBA ports.
  • NOTE: Dell does not support having HBAs located in the lower two, full-height, PCI slots (slots 5 and 7).
The following figures show the enumeration of the ports on the HBAs within the storage enclosure.
Figure 3. Rear view of DSMS 3060e storage enclosure showing location of HBA ports This image shows rear view of DSMS 3060e storage enclosure showing location of HBA ports.
Figure 4. Rear view of DSMS 1400 series storage enclosure showing location of HBA ports This image shows rear view of DSMS 1400 series storage enclosure showing location of HBA ports.
Use these figures as a point of reference when cabling the storage enclosures to the servers. The SAS HBAs installed in the servers in your solution may not always match the figures displayed here. However, the same cabling guidance is applicable.
  • NOTE: When you view the back of a server, HBA ports are numbered left to right, and then top to bottom.

Classifique este conteúdo

Preciso
Úteis
Fácil de entender
Este artigo foi útil?
0/3000 characters
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Forneça as classificações (de 1 a 5 estrelas).
  Selecione se o artigo foi útil ou não.
  Os comentários não podem conter estes caracteres especiais: <>()\