Dell Lifecycle Controller GUI v2.30.30.30 User's Guide

Configuring system time and date

To set the time and date for the managed system:

Start Lifecycle Controller. For more information, see Starting Lifecycle Controller.
From the Lifecycle Controller Home page, select Hardware Configuration.
In the right pane, select Configuration Wizards.
Under System Configuration Wizards, click System Time and Date Configuration. The default system time and system date displayed in Lifecycle Controller is the date and time reported by the system BIOS.
Modify the System Time and System Date (HH:MM:SS AM or PM), as required.
Click Finish to apply the changes.