For example, Wyse_3040_1.2.1.bin. The BIOS version may be updated in each release. For the latest
version of BIOS, refer to the latest Dell Wyse ThinOS Release Notes.
Rename the Dell
BIOS file as A10Q_bios.bin.
Upload the renamed
BIOS file to folder WNOS in the file server—ftp
or http(s).
Ensure that the INI parameter autoload is enabled for firmware update in WNOS.INI.
Restart the
thin client.
BIOS is updated automatically.
To verify
whether the new BIOS is updated correctly, from the desktop menu,
click the System Information option, or click
the System Information icon in zero mode. In
the Event Log tab, the BIOS version log is
displayed.
For example, System
Version: 8.4_105 (ROM 1.2.1).
This log
indicates that the BIOS version is updated to v1.2.1.
BIOS version can be viewed on the BIOS setup screen. To access the
BIOS setup, do the following:
Restart the thin client,
and during system boot press the F2 key.
Enter the BIOS password, if admin password is set.
Click Settings > General > System Information.
The BIOS version is displayed
on the screen.
BIOS can be updated by using the Wyse Management
Suite console. For more information about Wyse Management Suite, see
Dell Wyse Management Suite Administrator's Guide.
Data não disponível para o tópico
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Forneça as classificações (de 1 a 5 estrelas).
Selecione se o artigo foi útil ou não.
Os comentários não podem conter estes caracteres especiais: <>()\