Articles
Invalid entry. Please use only Letters, numbers and any special characters except <>)(%/;,=#-/*
30 out of 131 shown
131 out of 131 shown
This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Data Center Infrastructure products. Dell carefully evaluates and monitors code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.
Updated: July 20, 2026
ID: 000205512
This KB provides steps to replace zone member.
Updated: May 22, 2026
ID: 000288932
Procedure to customize the chassis name.
Updated: May 20, 2026
ID: 000224253
Unable to import MAPS policy using BNA on SAN switch.
Updated: May 20, 2026
ID: 000052480
How to recover a slot from a EM-1045, CHASSIS, WARNING, Slot XX is being powered OFF (not enough power) message?
Updated: May 20, 2026
ID: 000022765
After upgrading to Fabric OS (FOS) 9.1.1c, unable to run inline commands from UNIX or Linux server to the switch with the "fosexec" commands.
Updated: May 19, 2026
ID: 000218645
A slow blinking amber light showing internally from the switch model DS6620B-V2, not from the switch panel, is confirmed by Brocade to be the LED from the eUSB card (on the motherboard).
Updated: May 19, 2026
ID: 000217788
Learn how to use PuTTY for SSH key-based authentication. Step-by-step instructions to create SSH keys, add SSH key to PuTTY, and connect with SSH key securely on Connectrix B-Series.
Updated: May 18, 2026
ID: 000217157
This KB provides steps to rename a zone object. You can use these steps for all zone object types, including cfgs, zones, and aliases.
Updated: May 18, 2026
ID: 000217021
The seccermgmt cert shows error "Is an unknown x509 format."
Updated: May 18, 2026
ID: 000216601
Connectrix B-Series FOS compatibility check with SMI-S Agents
Updated: May 18, 2026
ID: 000215554
Configupload output automatically generated with switch name suffix rather than the file name provided by the user.
Updated: May 18, 2026
ID: 000215479
When the active ports have exhausted the current POD license pool, additional ports will not be assigned a license. In such cases, manually move licenses from unused ports by releasing the POD assignment to a newly used port and reserve it.
FOS 9.x and above
Updated: May 18, 2026
ID: 000214831
This issue is seen while the backed-up switch configuration has been loaded to the switch using the configdownload command.
Updated: May 18, 2026
ID: 000214361
AES256-SHA256 (0x3d) and AES128-SHA256 (0x3c) is blocked for TLS.
Updated: May 18, 2026
ID: 000213633
Fabric OS 9.1.0 introduces the Fibre Channel Link Aggregation (FC-LAG) feature to provide FC-LAG capability between Brocade switches and Cisco UCS FIs that are configured in end-host mode.
Updated: May 17, 2026
ID: 000212938
Switch policy status is critical due to WWN_DOWN.
Updated: May 17, 2026
ID: 000212065
OpenSSH public key authentication provides password-less logins, known as SSH authentication that uses public and private key pairs for incoming authentication. Any admin user can perform incoming Open SSH public key authentication.
Updated: May 17, 2026
ID: 000211680
DCX8510-8B rebooted with error "Processor rebooted - Reset"
Updated: May 16, 2026
ID: 000210195
wwpn of the connected device is not displayed correctly showing 0s.
Updated: May 16, 2026
ID: 000209852
How to disable the ISLs if no longer required
Updated: May 16, 2026
ID: 000209851
Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.
Updated: May 16, 2026
ID: 000206380
Unable to add LUNs beyond the current 256 on servers within the UCS Domain.
Updated: May 16, 2026
ID: 000205949
This KB article is to explain on how to add Gateway IP while using IPV6 using CLI and WebTools.
Updated: May 16, 2026
ID: 000205218
Around December 2022 the Ports On Demand (POD) kit license activation process changed.
Updated: May 15, 2026
ID: 000205081
Historical Port Stats collection doesn't work for some switches and SNMP data is not been received in SANnav
Updated: May 15, 2026
ID: 000202409
Self-signed syslog switch certificates are supported in Fabric OS. as long as the certificate is created on another system (read: server) which has OpenSSL support. Or if a customer wants to have a secure syslog, it also can be a CA signed certificate.
Updated: May 15, 2026
ID: 000202364
There is a limited number of DS-6620B, switch type 162, unable to add additional licenses. (including Pod kit)
Updated: May 14, 2026
ID: 000201173
This article explains the steps involved cloning a default policy in MAPS configuration and activating the new cloned maps policy.
Updated: May 14, 2026
ID: 000201030
CPs become out of sync. MAPS changes trigger the MAPS Daemon (MD) to panic leading to loss of sync.
Updated: May 14, 2026
ID: 000199181