Articles
Invalid entry. Please use only Letters, numbers and any special characters except <>)(%/;,=#-/*
30 out of 256 shown
256 out of 256 shown
This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.
Updated: May 25, 2026
ID: 000205512
This KB provides steps to replace zone member.
Updated: May 22, 2026
ID: 000288932
How to upgrade Rocky Linux v8.6 or above.
Updated: May 23, 2026
ID: 000368537
Which ports must be open for Disaster Recovery (DR) in SANnav 2.3.x and 2.4.x?
Updated: May 23, 2026
ID: 000368512
Connectrix SANnav: Error "IP Address is not reachable" while setting up disaster recovery on the Primary node.
Updated: May 23, 2026
ID: 000348611
How to add an NTP server after SANnav installation. Add the NTP servers to the chrony.conf file. Once added, restart chronyd and confirm synchronization using the "chronyc sources" command.
Updated: May 23, 2026
ID: 000348524
Proxy service does not start after replacing the SSL certificate with CA signed.
Updated: May 23, 2026
ID: 000340227
The switch user does not have privilege to access all possible VFs.
Updated: May 23, 2026
ID: 000328225
vCenter Host discovery on SANnav fails with error "Conflict-Existing Host"
Updated: May 22, 2026
ID: 000254427
Unable to send CallHome from SANnav or Brocade switch after Secure Connect Gateway (SCG) upgrade to 5.26.00.18.
Updated: May 22, 2026
ID: 000245541
SANnav Management portal GUI access issues after fresh installation.
This web browser is too old to run the Web Console (missing selector(:is(): where())
A modern browser is required for security, reliability, and performance.
Updated: May 21, 2026
ID: 000242166
Procedure to customize the chassis name.
Updated: May 20, 2026
ID: 000224253
Unable to import MAPS policy using BNA on SAN switch.
Updated: May 20, 2026
ID: 000052480
Switch status is Marginal even after renewal of a self-signed Kafka certificate in SANnav.
Updated: May 20, 2026
ID: 000223016
How to recover a slot from a EM-1045, CHASSIS, WARNING, Slot XX is being powered OFF (not enough power) message?
Updated: May 20, 2026
ID: 000022765
This article describes how to collect SANnav technical support information.
Updated: May 19, 2026
ID: 000020604
After upgrading to Fabric OS (FOS) 9.1.1c, unable to run inline commands from UNIX or Linux server to the switch with the "fosexec" commands.
Updated: May 19, 2026
ID: 000218645
Users are unable to log in due to full file systems on SANnav versions 2.2.1, 2.2.2, 2.2.2.1, and 2.2.2a.
Updated: May 19, 2026
ID: 000217906
A slow blinking amber light showing internally from the switch model DS6620B-V2, not from the switch panel, is confirmed by Brocade to be the LED from the eUSB card (on the motherboard).
Updated: May 19, 2026
ID: 000217788
From the switch supportsave & SANnav data, it was figured out that the SNMP traps are not received from the switch to SANnav
Updated: May 18, 2026
ID: 000217340
Learn how to use PuTTY for SSH key-based authentication. Step-by-step instructions to create SSH keys, add SSH key to PuTTY, and connect with SSH key securely on Connectrix B-Series.
Updated: May 18, 2026
ID: 000217157
This KB provides steps to rename a zone object. You can use these steps for all zone object types, including cfgs, zones, and aliases.
Updated: May 18, 2026
ID: 000217021
The seccermgmt cert shows error "Is an unknown x509 format."
Updated: May 18, 2026
ID: 000216601
Connectrix B-Series FOS compatibility check with SMI-S Agents
Updated: May 18, 2026
ID: 000215554
How to retrieve or access MiB files using SANnav.
Updated: May 18, 2026
ID: 000215480
Configupload output automatically generated with switch name suffix rather than the file name provided by the user.
Updated: May 18, 2026
ID: 000215479
When the active ports have exhausted the current POD license pool, additional ports will not be assigned a license. In such cases, manually move licenses from unused ports by releasing the POD assignment to a newly used port and reserve it.
FOS 9.x and above
Updated: May 18, 2026
ID: 000214831
This issue is seen when the SSL certificates are applied to SANnav however, the browser shows an insecure connection although the SSL certificate is installed.
Updated: May 18, 2026
ID: 000214362
This issue is seen while the backed-up switch configuration has been loaded to the switch using the configdownload command.
Updated: May 18, 2026
ID: 000214361
AES256-SHA256 (0x3d) and AES128-SHA256 (0x3c) is blocked for TLS.
Updated: May 18, 2026
ID: 000213633