OS9

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

Dell guidance to mitigate risk and resolution for the side-channel analysis vulnerabilities (also known as L1 Terminal Fault or L1TF) for servers, storage, and networking products. For specific information about affected platforms and next steps to apply the updates, see this guide.

Dell OS9 remediation is available for the OpenSSL CVE-2022-0778 vulnerability.

Dell OS9 remediation is available for the OpenSSL CVE-2021-4160 vulnerability for MIPS processor-based platforms.

Vulnerability scanners running against Dell Networking OS6, OS9, and OS10 are incorrectly showing the devices are vulnerable to CVE-2023-38408.

This article contains information about the S-Series S3100 Platform.

This article contains information about the S-Series S4048T-ON Platform.

A brief overview of basic troubleshooting steps for fan issues across all Dell switch platforms with removable fan units.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

A brief overview of basic troubleshooting steps across all Dell switch platforms for a switch that appears to be unresponsive.

This article documents the procedure to perform a clean install for ONIE, Firmware updater, SSD firmware, and OS10 from USB This would be helpful when you are upgrading the switches from a Factory-installed firmware or an old firmware. You must uninstall OS10 and do a clean installation of the switch is running on 10.4.2.x or earlier release, as per the Dell SmartFabric OS10 Installation, Upgrade, and Downgrade Guide.

This article provides information about Dell Networking Force10 Chassis MIB OIDs running OS9.

This article explains how to configure a Manual Dynamic Host Control Protocol (DHCP) Binding or Static DHCP binding in Dell Networking OS9.

Ping drops to management on Dell Networking OS9 switches.

Dell S4048-ON switches are rebooting intermittently due to crashes in the MLD process. The issue was identified when a few clients were activated in the network, leading to crashes, and subsequent reboots. The root cause was found to be a corrupted ICMPv6 MLD report packet with an abnormal value in the number of sources field of this packet.

Procedure for creating an ONIE USB livedisk with the onie-recovery iso Used for recovery on network switches whose working images have become corrupt and unbootable.

OS9 went End of Sale and End of Development life at the end of 2023. This changes how the product will be supported in the future.

How to Configure Virtual Router Redundancy Protocol (VRRP) on Dell Networking OS9 Switches

This is a brief solution guide for ssh in vrf management in OS9 switch.

The steps in this article are applicable to Dell Networking OS9 switches that support Virtual Link Trunking.

How to Create a Port Channel Link Aggregation Group (LAG) on Dell Networking OS9 and Legacy Force10 switches

This article explains how to configure speed and negotiation settings in 1G Combo Ports in Dell Networking OS9 on the S3100 Series platform.

This article explains how to use DELL OS9 switch as an FTP server for uploading or downloading files from a local flash.

This is a general guide on how to get the Service Tag from dell switches (OS6, OS9, OS10, or SONiC).

How to Format a USB in a Dell Networking Force10 switch running OS9 Firmware Version.

PVID Mismatch Reported on HP Switch Connected to Dell PowerSwitch models running OS9 or OS10 by a trunked port-channel.

Operating system Install using ONIE Install - Fresh Install