Dell XC Core XC4520C

DSA-2020-147: Dell Server Platform Security Advisory for the 2020.1 Intel Platform Updates (June 2020) - Intel SSD - CVE-2020-0527

Dell EMC guidance to mitigate risk and resolution for the iDRAC multiple vulnerabilities. For specific information about affected iDRAC versions and next steps to apply the updates, see this guide.

A power‑off occurs when the inlet temperature exceeds the critical limit because the alert action is configured to shut down; the temperature condition itself does not trigger an automatic shutdown.

Dell iDRAC9 remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

This Knowledge Base article explains the steps to take when the VxRail (Virtual Extensible Infrastructure) alarm VXR01406E / MYSTIC01406E – Virtual SAN (Storage Area Network) Health Alarm ‘Advanced Virtual SAN configuration in sync’ is triggered.

Summary of the enhanced vMotion Compatibility (EVC) mode

NVP-vProxy: Image recovery to VxRail failing when VMware stops the operation because datastore is marked as out of space.

Dell Micron 7450 and 7500 Non-Volatile Memory Express solid state drives may encounter drive initialization failure due to a firmware issue, resulting in the solid state drives being unrecoverable.

PowerEdge servers crash with PCIe fatal errors while updating Kioxia CM6 NVMe drive firmware.

Seagate Skybolt and SkyboltServoBP drive fails with medium format corrupted errors.

Dell Samsung Serial Attached SCSI (SAS) PM1653 and PM1655 solid state drives may report excessive Sense Key faults 0x3, 0x11, 0x0, or 0x4, 0x29, 0x4. These faults have the potential to cause unexpected drive issues.

This article explains how to perform a password management task in VCF environment when it is not possible with the error: "Password management operation failed in prevalidation stage"

Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.

XC nodes that are equipped with Mellanox CX4-Lx or Mellanox CX5 network devices fail to complete Nutanix Life Cycle Manager (LCM) updates due to out-of-date firmware that requires an intermediate firmware update to be applied first.

When spare capacity in PowerFlex is smaller than the size of the largest Fault Set, PowerFlex alerts the user. Increasing the spare capacity helps clear this alert.

iDRAC Service Module (iSM) versions 4.0.1 and earlier for VMware ESXi may stop functioning and the dcism service stop if the core hostd service of the ESXi host was recently restarted.

Security Scan run against an XC Series solution may report a CVE-2013-4786 vulnerability against the iDRAC.

This article outlines how to create a firmware baseline, view compliance reports, and apply updates in Dell OpenManage Enterprise.

Dell PowerEdge Server remediation is available for an OpenSSL Vulnerability that could be exploited by malicious users to compromise the affected systems.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

Dell EMC Server Platform Intel Platform Updates (2019.2) to address multiple vulnerabilities which may potentially be exploited to compromise the system.

Dell EMC Server Platform Security Advisory for Intel Platform Updates (December) to address multiple vulnerabilities which may be potentially exploited to compromise the system.

Dell EMC Server Platform Security Advisory for Intel SA-00329 – Intel® Processors Data Leakage Advisory - CVE-2020-0548, CVE-2020-0549

DSA-2020-145: Dell EMC Server Platform Security Advisory for the 2020.1 Intel Platform Updates (June 2020) - CVE-2020-0528, CVE-2020-0529, CVE-2020-0545

Deployment is failing due to host IP being assigned through DCUI or on the wrong VMK.

Dell PowerEdge Server remediation is available for a Tianocore EDK2 Vulnerability that could be exploited by malicious users to compromise the affected systems.

This article describes how to boot the ESXi server with Virtual Storage Area Network (vSAN) modules disabled.

This article guides user through resolving link option issues available with this integrated LOM. This LOM is typically shipped with XR4000 chassis nodes and used in Telco, Mixed IP, and Azure Local (AX, MC) nodes like 4520C/4510C compute sleds.

NSX-T Edge nodes Password Expired for accounts root, admin and audit

Dell PowerEdge Server remediation is available for 2025.3 Intel Platform Update (IPU) components that could be exploited by malicious users to compromise the affected systems.