OEMR R960

Understand and troubleshoot PowerEdge hard disk drives, RAID, PowerEdge RAID Controller, and other storage hardware such as cables, backplane, so forth.

The PowerEdge embedded LifeCycle Controller provides a simplified method for installation of supported Windows Server and Linux server operating systems with the OS Deployment feature. This article explains how to use the iDRAC LifeCycle Controller to install a supported operating system on most Dell PowerEdge servers. Step-by-step instructions and OS installation videos for Windows Server, Ubuntu Server LTS, SUSE Linux Enterprise Server, or Red Hat Enterprise Linux installation with LifeCycle Controller

This article explains the different reasons hard drives can fail in detail.

Dell Micron 7450 and 7500 Non-Volatile Memory Express solid state drives may encounter drive initialization failure due to a firmware issue, resulting in the solid state drives being unrecoverable.

This article explains different methods to reset, power drain or perform a virtual AC cycle.

PowerEdge RAID Controller (PERC11, PERC10), Human Interface Infrastructure (HII) configuration utility, and iDRAC do not support array expansion.

Server BIOS Update Guidelines for Microsoft Secure Boot Certificates are provided in this article.

This article outlines the actions required to prepare a system for retirement or repurposing using the LifeCycle controller.

This article provides an explanation of the backplane hard drive LED indicators.

PowerEdge servers do not support operating system installation, or boot from direct CPU‑attached NVMe SSD drives if the metadata format size is not set to 0.

PowerEdge servers equipped with Dell Micron 7500 NVMe solid state drives may exhibit elevated fan RPM speeds.

Dell Enterprise NVMe solid state drives may be leveraged as a substitute for Dell Data Center NVMe solid state drives.

How to Subscribe to receive Dell Driver and Firmware Update notifications for PowerEdge Servers. To ensure optimal performance and stability for your Dell system, be aware of the latest updates available for the drivers and firmware. There are several systems to do this as explained in the article below.

The Dell Nautilus Firmware Update Utility is flexible and simple to use as it contains all the latest, relevant firmware updates for hard drives in your Dell server.

All Virtual machines (VMs) losing network connectivity on HOST, once VMs Migrated to a new HOST, that HOST experiences the same Symptoms.

LCWipe command produces undesired side effects in some iDRAC9 firmware releases. The recommendation is to use the SystemErase feature to securely erase configurations and end user data when retiring or repurposing server hardware.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

To replace a CMOS battery, remove the air shroud, disconnect and remove any expansion cards, locate the battery socket, and carefully pry out the CMOS battery. After installing a new CMOS battery, you must reinstall the expansion cards, install the air shroud, and restore the BIOS settings, ensuring the battery is operating properly and the correct data and time are set in the System Setup.

This article presents opportunities to understand and troubleshoot some common causes of fan noise in a PowerEdge server. It is also relevant for 100% fan speeds.

Information about managing, upgrading, and monitoring your Dell Rack and Tower PowerEdge server hardware and Out-of-Band (OoB) System Management tools.

The "Predictive failure reported for disk x" error continues to be logged every 24 hours, even after the identified drive has been replaced. The issue only affects drives connected to PERC Controllers in RAID configuration.

Unsure about the procedure to update a specific component's firmware in a PowerEdge system? Learn how to in this specific article.

This article addresses an issue in which conversion of Windows Server from an evaluation to a fully licensed edition fails. The error that is returned appears to indicate a problem with the supplied product key, but the key is known to be valid.

PowerEdge connected Dell NVMe SSDs with the Limited Retry (LR) bit set may experience an increase in failures due to elevated media and data‑integrity error rates.

Find answers and resources to get started or do more from your MyService360 dashboard with enterprise services data analytics and visualizations.

Dell PowerEdge Server remediation is available for Intel® Ethernet Controllers & Adapters and Intel® Data Center GPU vulnerabilities that may be exploited by malicious users to compromise the affected system.

How to use the PowerEdge Server ePSA tools to stress test the CPU.

This article details the procedure to troubleshoot power supply unit (PSU) issues that may arise on a PowerEdge Server.

This article describes what can happen while collecting SupportAssist logs using iDRAC9 UI. The operation may result in an error, or incomplete logs may be collected.

This article provides information about how to use the LCC to deploy a supported OS.