PowerEdge M7725

This article details the most recent firmware version for Integrated Dell Remote Access Controller 10 (iDRAC10), designed for Dell PowerEdge servers from the 17th generation onwards.

Dell Technologies guidance to mitigate risk and resolution for the side-channel analysis vulnerabilities (also known as Meltdown and Spectre) for servers, storage, and networking products. For specific information about affected platforms and next steps to apply the updates, see this guide.

Dell PowerEdge Server remediation is available for OpenSSL Vulnerabilities that could be exploited by malicious users to compromise the affected systems.

Liquid Cooled PowerEdge servers with AMD EPYC 9005 series processors may experience "THRM0019 The thermal state of the server is Critical" event.

Dell EMC guidance to mitigate risk and resolution for the side-channel analysis vulnerabilities (also known as Speculative Store Bypass and Rogue System Register Read) servers, storage and networking products. For specific information on affected platforms and next steps to apply the updates, please refer to this guide.

Kioxia CM6 NVMe SSDs on 17‑generation servers experience I2C (Inter‑Integrated Circuit) communication issues. The fan speed stays locked at 100 % after OS boot. This behavior is observed on 17G servers only running Integrated Dell Remote Access Controller (iDRAC) 10 firmware version 1.30.10.50 or older.

Dell iDRAC10 remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

This article shows how to use and set up the virtual media function of Integrated Dell Remote Access Controller (iDRAC) 6, 7, 8, or 9.

Dell PowerEdge Server remediation is available for Dell AMD-based PowerEdge Server Vulnerability that could be exploited by malicious users to compromise the affected systems.

NVIDIA ConnectX-8 Network Interface Card (NIC) RDMA performance remains far below the theoretical 800 Gb/s bandwidth even with the auxiliary PCIe x16 cable firmly connected.

PowerEdge connected Dell NVMe SSDs with the Limited Retry (LR) bit set may experience an increase in failures due to elevated media and data‑integrity error rates.

Dell PowerEdge 17G servers record inaccurate CPU index within iDRAC10 life cycle Log (LCLOG) and System event log (SEL) when machine check event (MCE) is recorded.

Dell Micron 7450 and 7500 Non-Volatile Memory Express solid state drives may encounter drive initialization failure due to a firmware issue, resulting in the solid state drives being unrecoverable.

In rare cases, such as the CPU, memory, NVIDIA ConnectX-8 InfiniBand card, and other PCIe cards are under a heavy workload, the ConnectX-8 connection drops for about five seconds. When this happens, a PCI3039 or PCI3040 error is logged in the System event log (SEL).

Dell Integrated Rack 7000 Series (IR7000): M7725 System-Level 'Power Cap' Feature is not available in iDRAC.

Despite a lack of system load or activity, the fans on the PowerEdge M7725 server are operating at maximum speed.

Leveraging the 'Reboot Required' filter and selecting all items in this filtered view results in the 'make compliant' job applying all non-compliant firmware components. An unexpected reboot of the target is seen as components that do require a restart are deployed to the target. The issue is only seen if selecting all objects and using the 'Reboot Required' filter. All other filters work as designed.

The Lifecycle Controller logs reports SPDM0001 and SPDM0003 warning messages after every iDRAC reset.

OpenManage Enterprise version 4.1 entitlements feature will no longer work after October 2024 due to the decommissioning of legacy OAUTH APIs. Also, the standalone Dell License Manager application is end-of-life.

Connection Status shows disconnected for all devices in OpenManage Enterprise Services (OMES) plugin 4.1.0 under the Site Health tab - Managed Devices page.

OpenManage Enterprise (OME) Services plug-in may not show a device, or the device is in staging status.

This article covers the process of collecting debug logs from OpenManage Enterprise 3.9 and later.

Systems containing an enterprise SSD or NVMe device which are powered off for a duration of more than 3 months may exhibit errors or drive faults due to data retention limitations within the device.

Dell Repository Manager (DRM) 3.4 may stop at the spinning wheel screen for preferences page in upgrade scenarios.

This article provides a brief introduction to the Intel® VROC and describes how to configure it on Dell PowerEdge servers.

OpenManage Enterprise: Error in Devices/Groups tab while creating repository in Update Manager Plugin 1.2

In some situations Dell Technical Support may request evidence to perform a more assertive diagnosis, this article illustrates how to attach files to your service request through the Dell support portal.

Dell PowerEdge Server remediation is available for Dell AMD-based PowerEdge Server Vulnerability that could be exploited by malicious users to compromise the affected systems.

Windows 2022 has not removed any features from Hyper-V or networking. However, they have forced LBFO Virtual switches to the Command line for creation. While nothing has changed, the Vmswitch fails to create, as normal. The Error is Failed while adding Virtual Ethernet Switch Connections. Attaching a virtual switch to an LBFO team is Deprecated. The only way around this error is to add "-AllowNetLbfoTeams $true" this will require PowerShell and may be a call generator.

Dell Repository Manager 3.3.2 job exporting a repository to a Software update Utility (SUU) image may end with a "Partial Success" status. Further job details contain the message "Falling back to default inventory collector carried." However, the SUU image should perform applying all applicable DUP packages.