Articles
Invalid entry. Please use only Letters, numbers and any special characters except <>)(%/;,=#-/*
30 out of 246 shown
246 out of 246 shown
Unisphere and Solutions Enabler 9.x software are unable to manage V4 array models. The 9.x versions of the software cannot detect PowerMax model 2500 and model 8500 arrays.
Updated: May 19, 2026
ID: 000218791
In Unisphere, when trying to create a Compliance Alert Policy the needed storage groups are not listed.
Updated: May 15, 2026
ID: 000202924
Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates
Updated: July 24, 2026
ID: 000185734
Isilon/PowerScale node panics
Updated: July 20, 2026
ID: 000194064
Dell PowerMaxOS, Dell PowerMax EEM, Dell Unisphere for PowerMax, Dell Unisphere for PowerMax Virtual Appliance, Dell Solutions Enabler and Dell Solutions Enabler Virtual Appliance remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.
Updated: July 09, 2026
ID: 000483543
Unisphere for PowerMax: Health Checks Fail, Error "Configuration server request cannot be processed"
Unisphere for PowerMax health checks fails with error "The configuration server request cannot be processed at this time."
Updated: July 07, 2026
ID: 000418319
Detailed procedure to upgrade Solutions Enabler and Unisphere for PowerMax.
Updated: July 06, 2026
ID: 000021788
Performance data is missing after upgrade.
Updated: June 26, 2026
ID: 000228795
Unisphere for PowerMax: SNMP configuration lost after upgrade from 5978.711.711 to 5978.714.714.
Updated: June 26, 2026
ID: 000228793
Unisphere for PowerMax allows customers to export performance data for offline viewing in Unisphere Performance Viewer (UPV). The resulting files can be imported on a virtual machine (VM) running the Performance Viewer but must first be exported from the Unisphere for PowerMax host.
Updated: June 22, 2026
ID: 000007990
Unisphere for PowerMax Alert Description =Symmetrix 000123456789: Service Processor down or not communicating with the array.
OR
symevent alert "The Symmetrix Service Processor or MMCS is not communicating with the Symmetrix."
Updated: June 12, 2026
ID: 000203646
This article describes the procedure for users to get notifications of documents published on any product that has notification abilities.
Updated: June 10, 2026
ID: 000183044
This article describes how to find the serial number, product ID, or Product Serial Number Tag (PSNT) that is required to open a service request or support case for Dell Storage and Data Protection hardware products.
Updated: June 05, 2026
ID: 000021638
Unable to log in to Unisphere for PowerMax and getting the error message, "Error Logging In."
Updated: June 05, 2026
ID: 000190456
This article discusses how to configure Unisphere for PowerMax Remote Syslog.
Updated: June 02, 2026
ID: 000206117
Effective Used Capacity is the best measure of utilization.
Updated: May 29, 2026
ID: 000190104
How to configure secure SMTP Email servers for Alerts in Unisphere For PowerMax.
Updated: May 28, 2026
ID: 000380011
An alert was triggered for the storage group test_snap in Unisphere for PowerMax due to noncompliance with its snapshot policy test_hourly_snapshot. sThe policy require x snapshots, but the current snapshot count is 0, resulting in a compliance gap. The error code is show as "N/A."
Updated: May 24, 2026
ID: 000417048
SK Hynix PE8010 & PE8030 NVMe M.2 drives have been observed to report a PDR3 Event Code and failed status.
Updated: May 21, 2026
ID: 000225181
Unisphere for PowerMAX: Ping Remote IP in RE IP Interfaces returns "One or more IP addresses passed do not exist in the director emulation".
Updated: May 19, 2026
ID: 000221576
Recommendations for carrying out Proactive Healthchecks on PowerMax Array
Updated: May 19, 2026
ID: 000219791
Unisphere for PowerMax upgrade fails from version 9.2.x to 10.0.x
Updated: May 17, 2026
ID: 000213144
How to set SRDF or Metro preference for Witness protected groups.
Updated: May 16, 2026
ID: 000209777
Unable to register Storage Systems, receive message "No PowerMax/VMAS arrays visible" and while registering Storage System, "400 Failed to discover VMAX system, invalid connection. Status code: 400, Bad Request."
Updated: May 15, 2026
ID: 000203472
Upgrading Unisphere for PowerMax fails because SMAS database stops and does not start.
Updated: May 15, 2026
ID: 000202808
VDM cannot load after a DataMover (DM) panic due to blocked threads, issue is when eNAS is running Version 8.1.15.401 and NFSv4 mounted filesystem.
Updated: May 15, 2026
ID: 000202531
SRM 4.7.1 Vmax/PowerMax discovery fails after upgrade to SRM 4.7.1
SRM discovery test fails with http-get: command returned with a non-zero status (Status: 5)! 500: Internal Server Error
Updated: May 15, 2026
ID: 000202081
TDEV's expansion in SRDF and SRDF/Metro active session using SYMCLI.
Updated: May 13, 2026
ID: 000197747
Customer reported no performance data received in CloudIQ from Unisphere for PowerMax.
Updated: May 13, 2026
ID: 000197522
Customer security scans found that the version of Log4j used by Unisphere for PowerMax 9.2.x and below is 1.2 and is currently end of life.
Updated: May 13, 2026
ID: 000197008