Articles
Invalid entry. Please use only Letters, numbers and any special characters except <>)(%/;,=#-/*
30 out of 686 shown
686 out of 686 shown
This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.
Updated: December 15, 2025
ID: 000205512
To ensure optimal performance and stability for your Dell system, be aware of the latest updates available for the drivers and firmware. There are several systems to do this as explained in the article below.
Updated: November 26, 2025
ID: 000127716
The system encountered an unexpected error. Search for the error code on the support website or product forums, or contract your service provider, if available.
Error Code: 0x7d13001
Updated: December 18, 2025
ID: 000057318
This article shows how to check the live/active sessions for a SMB NAS Server using CLI
Updated: December 18, 2025
ID: 000205484
Is it possible to disable SMB shares from a NAS Server so that users cannot access the shares temporarily? (User Correctable)
Updated: December 18, 2025
ID: 000226616
An array may go into Service Mode (Data Unavailable) due to log bloating (Dell Correctable)
Updated: December 18, 2025
ID: 000052256
Random stop responding conditions and performance issues while trying to access the exports on the destination side of replication. (User Correctable)
Updated: December 18, 2025
ID: 000187917
"Cannot update destination because destination pool is full" (User Correctable)
Updated: December 17, 2025
ID: 000063260
CloudIQ scores on some Unity arrays are now showing red and are indicating that some drives have old firmware.
Updated: December 16, 2025
ID: 000082064
Dell EMC Unity: Performing VDM Migration tasks (File Import) with VNX dual Control Station environments can fail with Error Code:0x90001b6 or 0x900010b. (User Correctable)
Updated: December 16, 2025
ID: 000052263
Failed: Source in use by another replication process (Error Code: 0x9ef4)
Failed: The specified LUN name has already been reserved or LUN with this name already exists. (Error Code: 0x6701140)
(Dell Correctable)
Updated: December 16, 2025
ID: 000052823
Dell Unity: The NTP servers cannot be used because they are not synchronized. Please synchronize your NTP servers and try again. (Error Code:0x6000841) (User Correctable)
Updated: December 15, 2025
ID: 000052079
How to check Drive End Of Life (EOL) on Dell Unity arrays.
Updated: December 15, 2025
ID: 000267404
Drive is predicted to wear out in less than 180 days.
Updated: December 12, 2025
ID: 000064271
The Disk Processor Enclosure (DPE) has faulted.
Updated: December 12, 2025
ID: 000064276
The Disk Array Enclosure (DAE) has faulted.
Updated: December 12, 2025
ID: 000064303
DPE fault LED is on due to fault with LCC cable or connector.
Updated: December 12, 2025
ID: 000064309
Dell Unity OE Matrix, release dates, recommended code, and so on.
Updated: December 12, 2025
ID: 000020641
Trying to boot from San using Powerpath and a Dell EMC Unity array in and AIX Enviroment
Updated: December 12, 2025
ID: 000052575
This article is meant to assist you with the most common errors that are seen in a Unity array, regarding CAVA issues.
Updated: December 12, 2025
ID: 000052716
This article covers the necessary steps to verify and address issues with the Kerberos Service response issues when trying to add or modify NAS servers in a LDAP environment.
Updated: December 12, 2025
ID: 000052721
Uploading files to Dell EMC Unity via UEMCLI fail for a lack of space on the Unity partitions, however there is adequate free space on the Unity system.
Updated: December 12, 2025
ID: 000052819
One or more NAS servers may not be in a healthy state. You can continue with the upgrade, but it is recommended that you record the error code and contact your service provider.
[Warning Code: dm::check_nas_servers_health_3]
Updated: December 12, 2025
ID: 000054744
How to handle blocked thread events in a Dell Unity system. (Dell Correctable)
Updated: December 12, 2025
ID: 000058575
This article explains the symptoms and resolution of several drives appearing as faulted in a newly installed array (this could also happen if there is cross cabling after Unity has been installed)
Updated: December 12, 2025
ID: 000199915