Articles
Invalid entry. Please use only Letters, numbers and any special characters except <>)(%/;,=#-/*
30 out of 682 shown
682 out of 682 shown
This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.
Updated: December 15, 2025
ID: 000205512
To ensure optimal performance and stability for your Dell system, be aware of the latest updates available for the drivers and firmware. There are several systems to do this as explained in the article below.
Updated: November 26, 2025
ID: 000127716
"Cannot update destination because destination pool is full"
Updated: December 12, 2025
ID: 000063260
Drive is predicted to wear out in less than 180 days.
Updated: December 12, 2025
ID: 000064271
The Disk Processor Enclosure (DPE) has faulted.
Updated: December 12, 2025
ID: 000064276
The Disk Array Enclosure (DAE) has faulted.
Updated: December 12, 2025
ID: 000064303
DPE fault LED is on due to fault with LCC cable or connector.
Updated: December 12, 2025
ID: 000064309
Dell Unity OE Matrix, release dates, recommended code, and so on.
Updated: December 12, 2025
ID: 000020641
Trying to boot from San using Powerpath and a Dell EMC Unity array in and AIX Enviroment
Updated: December 12, 2025
ID: 000052575
This article is meant to assist you with the most common errors that are seen in a Unity array, regarding CAVA issues.
Updated: December 12, 2025
ID: 000052716
This article covers the necessary steps to verify and address issues with the Kerberos Service response issues when trying to add or modify NAS servers in a LDAP environment.
Updated: December 12, 2025
ID: 000052721
Uploading files to Dell EMC Unity via UEMCLI fail for a lack of space on the Unity partitions, however there is adequate free space on the Unity system.
Updated: December 12, 2025
ID: 000052819
Failed: Source in use by another replication process (Error Code:0x9ef4)
Failed: The specified LUN name has already been reserved or LUN with this name already exists. (Error Code:0x6701140)
Updated: December 12, 2025
ID: 000052823
One or more NAS servers may not be in a healthy state. You can continue with the upgrade, but it is recommended that you record the error code and contact your service provider.
[Warning Code: dm::check_nas_servers_health_3]
Updated: December 12, 2025
ID: 000054744
ESX hosts intermittent connection issue
Updated: December 12, 2025
ID: 000054771
How to handle blocked thread events in a Dell Unity system. (Dell Correctable)
Updated: December 12, 2025
ID: 000058575
This article explains the symptoms and resolution of several drives appearing as faulted in a newly installed array (this could also happen if there is cross cabling after Unity has been installed)
Updated: December 12, 2025
ID: 000199915
A blank upload error appears in the Unisphere dialog with no specific error message or error code.
Updated: December 12, 2025
ID: 000190184
Unable to configure LDAP and LDAPS -- connection verification fails.
Updated: December 12, 2025
ID: 000211909
Customer does not wish to use domain administrator credentials to join NAS Server to AD due to security reasons.
Customer would like to know what are the specific domain user permissions the NAS Server uses to Join to the Active directory.
Updated: December 12, 2025
ID: 000212026
Unable to restore a replicated LUN from a snapshot created prior to LUN expansion. Error: 0x716f100a
Updated: December 12, 2025
ID: 000200276
Asynchronous replication session was created, yet no data is being transferred.
Updated: December 12, 2025
ID: 000203359
Unable to access Unity management interface using https://FQDN or https://ip.address
Access to Unity takes place using https://FQDN/?casHome=LOCAL and https://ip.address/?casHome=LOCAL
Updated: December 12, 2025
ID: 000205133