Articles
Invalid entry. Please use only Letters, numbers and any special characters except <>)(%/;,=#-/*
30 out of 931 shown
931 out of 931 shown
This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.
Updated: April 27, 2026
ID: 000205512
This article is an accumulation of questions, answers, and information relating to VxRail upgrades.
Updated: April 21, 2026
ID: 000020129
This article outlines how to create a firmware baseline, view compliance reports, and apply updates in Dell OpenManage Enterprise.
Updated: May 02, 2026
ID: 000144728
Event code: VXR500ENC19
This event code indicates "<Enclosure Management Module Name> has failed."
Updated: May 01, 2026
ID: 000011668
Event code: VXR500AMP400
This event code indicates "The <sensor name> sensor has failed, and the last recorded value by the sensor was <current> A."
Updated: May 01, 2026
ID: 000011666
Event code: VXR500ENC21
This event code indicates "<Enclosure elements name> has been removed."
Updated: May 01, 2026
ID: 000011662
Event code: VXR500FAN0027
This event code indicates "The <sensor name> sensor has failed with a value of <fan speed> RPM."
Updated: May 01, 2026
ID: 000011656
Event code: VXR500FAN0013
This event code indicates "<fan name> RPM is less than the lower critical threshold."
Updated: May 01, 2026
ID: 000011658
Event VXR508SSD0002 triggers due to available spare being less than threshold value.
Updated: May 01, 2026
ID: 000189228
Event VXR500STOR393 is triggered due to: Auto-configure stacking is not allowed.
Updated: May 01, 2026
ID: 000189235
Attempting a copy-back operation on a non-unmap-capable drive triggers event code VXR500STOR375.
Updated: May 01, 2026
ID: 000189234
Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates
Updated: May 01, 2026
ID: 000185734
Event VXR500STOR374 triggers due to a non-Unmap-capable drive being used for a rebuild operation.
Updated: May 01, 2026
ID: 000189233
Event code VXR508STOR373 is triggered due to a hot spare drive not supporting unmap when the virtual drive (VD) has it enabled.
Updated: May 01, 2026
ID: 000189232
This KB article briefly discusses Event code: VXR500FAN0016
Updated: May 01, 2026
ID: 000011651
Event Code VXR508STOR372 triggers due to unmap being disabled or not supported on the controller.
Updated: May 01, 2026
ID: 000189231
Event Code VXR508STOR371 indicates: Unable to use the physical drive arg1 because the drive selected is not unmap-capable for virtual drive configuration.
Updated: May 01, 2026
ID: 000189229
Event code: VXR500FAN0020
This event code indicates "The <fan name> is non-functional."
Updated: April 30, 2026
ID: 000011654
Event code: VXR500ENC23
This event code indicates "<enclosure name> - Issue with PHY <PHY data>."
Updated: April 30, 2026
ID: 000011653
Event code: VXR500AMP405
This event code indicates "The <sensor name> sensor state has changed to a failed state with a value of <current> A."
Updated: April 30, 2026
ID: 000011650
Event code: VXR500ENC3
This event code indicates "<Enclosure Name> is shutdown."
Updated: April 30, 2026
ID: 000011649
Event code: VXR500FAN8503
This event code indicates "The Chassis was turned off because more than two internal fans stopped functioning."
Updated: April 30, 2026
ID: 000011648
Event code: VXR500CBL0002
This event code indicates "Backplane <bay ID> signal cable disconnected."
Updated: April 30, 2026
ID: 000011647
Event code: VXR500CBL0006
This event code indicates "Unsupported backplane <bay ID> configuration: Multiple RAID controllers cannot be connected to the same backplane."
Updated: April 30, 2026
ID: 000011644
Event code: VXR500CBL0005
This event code indicates "Backplane <bay ID> <connector name> connector incorrectly connected to the motherboard SATA controller."
Updated: April 30, 2026
ID: 000011642
Event code: VXR500FAN0015
This event code indicates "<fan name> RPM is greater than the upper critical threshold."
Updated: April 30, 2026
ID: 000011641
VxRail: Event Code: VXR500ENC24
This event code indicates "Communication with <enclosure name> is intermittent."
Updated: April 30, 2026
ID: 000011639
Event code: VXR500CBL0007
This event code indicates "Backplane <bay ID> <cable name> cable and backplane <bay ID> <cable name> cable are swapped."
Updated: April 30, 2026
ID: 000011638
Event code: VXR500CBL8500
This event code indicates "SAS cable <cable id> to expander <expander id> is not connected."
Updated: April 30, 2026
ID: 000011637
Event code: VXR500CBL0001
This event code indicates "Backplane <bay ID> power cable disconnected."
Updated: April 30, 2026
ID: 000011625