PowerSwitch S3100 Series

Dust or chemical contamination at the endface of a fiber optic LC connector or transceiver module impedes signaling. Dell engineering teams have verified cases in which a fully functional port appears to be a bad port because dirty optical connectors manifest as a port failing loop testing with acceptable power measurement levels. Cable connectors should be cleaned and when stored must be protected from dust particle or chemical contamination.

This document highlights minimum, recommended, and latest code versions for Dell Technologies Networking products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Data Center Infrastructure products. Dell carefully evaluates and monitors code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

How to recover a forgotten password on a Dell PowerSwitch running OS9.

How to download the latest firmware from the Dell Support Website for Dell Networking N Series, X series, and PowerConnect Series switches.

For the Dell PowerSwitch and Cisco Nexus switches, syslog can be transmitted through Transport Layer Security (TLS) and audit logs. Ensure that the terminal access controller access-controller system (TACACS) is used for the audit logs.

Addition of VLANs to Unified Computing System (UCS) Manager when using updating service profile templates and vNIC templates.

This article explains the how to configure Management IP and route in DELL EMC OS10

WebTools does not launch after upgrading switch to FOS 9.x.

This article explains how to set up VLANs on Dell OS9 switches.

The steps in this article are applicable to Dell Networking OS9 switches that support Virtual Link Trunking (VLT).

How to set up QoS on Dell Networking PowerSwitches running OS9 for Voice over IP (VoIP).

How to Create a Port Channel Link Aggregation Group (LAG) on Dell Networking OS9 and Legacy Force10 switches

This is a general guide on how to get the Service Tag from dell switches (OS6, OS9, OS10, or SONiC).

The issue is about new routes are not being installed in the Broadcom hardware on Dell S5248F switches. OS10 can learn new routes, but it is not able to install them in the Broadcom hardware tables. This issue affects all platforms and all OS10 versions, but may be mitigated using switch's configuration or different platforms where the tables are larger than S5200.

Enterprise SONiC license key

This article explains on how to change the default VLAN to allow VLAN 1 to be tagged and associated to ports in Dell networking OS9 platforms.

Dell Networking Intermittent High ICMP Latency seen in S-series Switches running OS9 Firmware

Vulnerability scanners running against Dell Networking OS6, OS9, and OS10 are incorrectly showing the devices are vulnerable to CVE-2023-38408.

A brief overview of basic troubleshooting steps for fan issues across all Dell switch platforms with removable fan units.

This article provides switch configuration guidance for Dell PS Series and SC Series SANs. Switch vendors include Arista, Brocade, Cisco, Dell, Huawei, HP, Juniper, and others.

As a part of the deployment guidance for Dell EMC Storage Spaces Direct Ready Nodes, for infrastructures that use RoCE v2 for RDMA using Mellanox CX4 LX adapters, we recommend disabling DCBX willing globally in the host OS and setting network adapter DCBXMode to Host in charge.

Troubleshooting the Switch Fabric Module

This article explains how to verify the checksum of the firmware image downloaded into the DELL Networking OS10 switch.

This guide provides instructions on how to configure management networks for accessing networked devices using console servers, Ethernet out-of-band, and Ethernet in-band. Large production networks can span across multiple rooms, buildings, or cities, and contain dozens or hundreds of network switches. Using a management network separate from the production network is often desired to configure and manage these environments. There are three types of management networks that are discussed in this guide, each offering its benefits. Network administrators may use one or more methods to configure, test, and manage their setups.

The purpose of this guide is to provide general guidelines for troubleshoot layer 1 connectivity issues when using transceivers in Ethernet switches.

Best practices for troubleshooting Power Supply Units (PSUs) errors or failure on Dell Ethernet switches

A brief overview of basic troubleshooting steps across all Dell switch platforms for a switch that appears to be unresponsive.

Enable and configure the SupportAssist feature on Dell EMC Networking S-series Switches by using the necessary command line interface commands.