Articles
Invalid entry. Please use only Letters, numbers and any special characters except <>)(%/;,=#-/*
30 out of 534 shown
534 out of 534 shown
This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.
Updated: May 16, 2026
ID: 000205512
Unable to run setfacl on Unity NFSv4 export.
Updated: May 13, 2026
ID: 000196295
Unity XT arrays (excluding XT 380/380F) have a micro serial port in the back that can be used for a direct connection into each SP.
Updated: May 16, 2026
ID: 000208170
Reported vulnerability with Nessus scan: "Unix Operating System Unsupported Version Detection: SUSE Linux Enterprise 15.0 support ended on 2019-12-31 (end of regular support) / 2022-12-31 (LTSS option). Upgrade to SUSE Linux Enterprise 12.5 / 15.1."
Updated: May 16, 2026
ID: 000207938
After upgrading code 5.2.1.0.5.013 or higher, Unisphere reports warning message regarding the spare drive policy.
Updated: May 16, 2026
ID: 000207645
This article details the susceptibility of Dell Unity products to the vulnerabilities detailed in CVE-2022-3437 and CVE-2022-3592.
Updated: May 16, 2026
ID: 000207506
This KB describes how to deal with the situation when Remote Syslog setting is not shown in the Unisphere UI.
Updated: May 16, 2026
ID: 000206947
Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.
Updated: May 16, 2026
ID: 000206380
This KB describes the cause of error code 0x1000100 and its solution.
Updated: May 16, 2026
ID: 000206174
After a Unity array is upgrades to 5.2.x there is a chance "NTP server is partially unreachable" will start generating on the array.
Updated: May 16, 2026
ID: 000206054
The article describes how to start using UEMCLI on Unity arrays for array management, configuration or monitoring.
Updated: May 16, 2026
ID: 000205901
This article describes managing the auto tiering of data in Unity hybrid storage pools through Unisphere.
Updated: May 16, 2026
ID: 000205852
Snapshots must be removed from the snapshots page instead of the host's page.
Updated: May 16, 2026
ID: 000205412
The article describes managing the auto tiering of data in Unity hybrid storage pools through Unisphere CLI (UEMCLI).
Updated: May 16, 2026
ID: 000205399
Unity system dials home with a neo14:60196 error. This is normally accompanied by other dialhomes, such as neo14:60258 and neo14:600F4.
Updated: May 16, 2026
ID: 000205395
Unity arrays cannot synchronize with NTP servers having a stratum value of 6 or greater.
No error is shown in Unisphere, but the Unity clock does not synchronize.
Updated: May 15, 2026
ID: 000205159
Unable to access Unity management interface using https://FQDN or https://ip.address
Access to Unity takes place using https://FQDN/?casHome=LOCAL and https://ip.address/?casHome=LOCAL
Updated: May 15, 2026
ID: 000205133
DELL EMC Unity :The object was not found with "Pool0". (Error Code:0x1000401) error while creating Traditional Pool on OE 5.2.0
The object was not found with "Pool0". (Error Code:0x1000401) while creating Traditional Pool.
Updated: May 15, 2026
ID: 000204906
There is the KB 000021201 for the general SFTP passwprdless login (https://www.dell.com/support/kbdoc/en-us/000021201). The example in the KB 000021201 is not for the SMB account. The current KB provides another exmaple for the SMB account.
Updated: May 15, 2026
ID: 000204879
Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates
Updated: May 15, 2026
ID: 000185734
One reason for unable to create a new LUN or rename an existing LUN.
Updated: May 15, 2026
ID: 000204695
This article explains the steps to separate and work around the issue of incorrect mapping when using LDAP where the encryption method used affects LDAP mapping.
Updated: May 15, 2026
ID: 000204586
After recent hardware maintenance where Service Processors (SPs) had to be removed, one or both SPs may panic, reboot sporadically or continuously, or come up in Service Mode if cabled incorrectly or components came loose.
Updated: May 15, 2026
ID: 000204581
The recommended IOPS per drive is different between Dell Unity and VNX arrays. Below are the values for both.
Updated: May 15, 2026
ID: 000204509
Answers to common Dell Unity Non-Disruptive Upgrade (NDU) related questions
Updated: May 15, 2026
ID: 000204308
Customer receives alert on NAS server reporting domain controller not reachable when one or more Domain controllers configured are RODC (Read-Only Domain Controller)
Updated: May 15, 2026
ID: 000204287
How to check expire date of SSL Certificate on CLI and Unisphere UI
Updated: May 15, 2026
ID: 000204179
This article explains why bandwidth schedules do not synchronize at the expected time when the time zone is set to any time zone other than UTC.
Updated: May 15, 2026
ID: 000204177
User already deleted the LDAP configuration and was attempting to delete the user/group entries. Because there is no proper configuration to reach LDAP servers the deletion job is failing with error 'Requested user or group was not found'.
Updated: May 15, 2026
ID: 000204094
When the Unity NAS server LDAP config is changed from auto to manual setting and a third LDAP server is added. The ldap.conf may get overwritten by a default or autogenerated ldap.conf.
Updated: May 15, 2026
ID: 000203757