Connectrix

These Release Notes contain new features, code enhancements and fixes in Connectrix SANnav Release 2.2.1

Find guidelines about your product, system specifications, tools, setup options, troubleshooting tips and more

This document describes how Congestion Spreading (a.k.a, Slow Drain) can impact your Storgae Area Network (SAN), the metrics used to describe the severity of each type of congestion for both Connectrix B-Series and the MDS-Series as well as preventive measures that can be taken to avoid the effects of Congestion Spreading.

This document provides basic platform and component support for Blade Chassis Switch Modules. The EMC Simple Support Matrix represents complete product support statements in a simplified, all-in-one format. All supported configurations for a product or solution that are listed in the ESSM format do not require any additional E-Lab Navigator validation.

Provides a high-level overview of Fibre Channel SAN topologies, discusses simple and complex Fibre Channel SAN topologies, and provides case studies for Brocade Virtual Fabrics. FICON connectivity is also discussed.

This document describes the basic steps involved in troubleshooting SFP/connection issue and the steps taken to narrow down the root cause.

Focuses on case studies and provides a brief overview of FCoE, the supported configurations and features, and case studies to show how to incorporate EMC Connectrix B switches, Cisco Nexus switches, Blade Servers and Juniper QFX3500 switches utilizing FCoE into an existing data center.

This document provides  data information for some EMC SAN products, including descriptions, system architecture, and management.

This guide describes the features and setup procedures for Apple Xsan host interface running Xsan FS to EMC Symmetrix and CLARiiON storage arrays over Fibre Channel and iSCSI and lists the features and recommended configurations to deploy Xsan on the Apple MAC OS X platform.

This document provides information on legacy SAN technologies.

This document provides data information for some vendor directors and switches, including descriptions, system architecture, and management. This document also provides installation guidelines and cabinet configuration examples.

This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.

This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.

This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, DCX Model and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.

This documentation set provides information on using the EMC Connectrix Manager application.

This documentation set provides information on using the EMC Connectrix Manager application.

This documentation set provides information for setting up, administering, and/or configuring the DS-5300B, DS-5100B, DS-300B, DS-32B2, DS-4100B, DS-4900B, DS-5000B, DS-220B and MP-7500B switches and the ED-48000B, AP-7600B, AP-7420B, Connectrix ED-DCX-B, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP4-18 blade,PB-48K-10G-6 blade, PB-DCX-16P blade, PB-DCX-32P blade, and the PB-DCX-48P blade.

This documentation set provides information for setting up, administering, and/or configuring the DS-5300B, DS-5100B, DS-300B, DS-32B2, DS-4100B, DS-4900B, DS-5000B, DS-220B and MP-7500B switches and the ED-48000B, AP-7600B, AP-7420B, Connectrix ED-DCX-B, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP4-18 blade,PB-48K-10G-6 blade, PB-DCX-16P blade, PB-DCX-32P blade, and the PB-DCX-48P blade.

This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, Connectrix DCX and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.

This documentation set provides information for setting up, administering, and/or configuring the DS-5300B, DS-5100B, DS-300B, DS-32B2, DS-4100B, DS-4900B, DS-5000B, DS-220B and MP-7500B switches and the ED-48000B, AP-7600B, AP-7420B, Connectrix ED-DCX-B, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP4-18 blade,PB-48K-10G-6 blade, PB-DCX-16P blade, PB-DCX-32P blade, and the PB-DCX-48P blade.

The Brocade Fabric Manager Administrator’s Guide is intended for use by system administrators during installation and configuration of the DS-8B3, DS-16B3, DS32-B2, DS-4100B, and DS-220B switches and the ED-1200B, ED-2400B, and ED-4800B directors and the AP-7420B application platform.

This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, Connectrix DCX, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.

This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, Connectrix DCX and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.

This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, Connectrix DCX, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.

This documentation set provides information for setting up, administering, and/or configuring the MP7500B switch and the DS-8B3, DS-16B3, DS-32B2, DS-4100B, DS-4900B, DS-5000B and DS-220B switches and the ED-24000B, and ED-48000B directors, Connectrix DCX, and the PB-48KB-18i blade, PB48K-48 blade, PB-48K-16IP blade, PB-48K-AP blade, and the PB-48L-10G-6 blade.