VxRail E660N

In diesem Artikel wird das Tool VxRail VxVerify und die erfolgreiche Ausführung von VxVerify in einer VxRail-Umgebung vorgestellt.

In diesem Dokument werden die minimalen, empfohlenen und neuesten Codeversionen für Dell Technologies Enterprise- und Datacenter Infrastructure-Produkte angegeben. Dell Technologies bewertet und überwacht die Codebereitstellungsdaten sorgfältig, um sicherzustellen, dass die Produktversionen unsere strengen Anforderungen erfüllen, damit wir unseren KundInnen zuverlässige Produkte und Lösungen bereitstellen können.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

Event code: VXR508FAN0014 This event code indicates "<fan name> RPM is greater than the upper warning threshold."

Event code: VXR508CBL0008 This event code indicates "One or more cables are missing from <controller name>."

Event code: VXR508AMP401 This event code indicates "Unable to read the < sensor name > sensor value."

VxVerify auf VxRail Manager kann versuchen, iDRAC- und iSM-Fehler durch Neustart von iDRAC und zugehörigen VxRail-Node-Services zu beheben.

Event code: VXR508CTL113 This event code indicates "The controller <controller name> is operating in Degraded Fault Tolerant Mode because of a mismatch between the encryption key setting of the controller and its peer controller."

Event code: VXR508BAT0031 This event code indicates "The system board battery status is unknown."

Event code: VXR508CTL202 This event code indicates "Unable to open the firmware and driver configuration file <file name> of <controller name>."

Event code: VXR508CTL208 This event code indicates "Unable to authenticate the entered passphrase for the <controller name>."

Event code: VXR508ENC13 This event code indicates "Unsupported configuration detected on <Enclosure Name>. <EMM0 1> <EMM1 2>"

Event code: VXR508CTL200 This event code indicates "The current firmware version <version number> is older than the required version <version number> for <controller name>."

Event code: VXR508FAN0018 This event code indicates "Enhanced Cooling Mode is not supported for fan <fan number>."

Event code: VXR500TMP504 This event code indicates "The <sensor name> sensor has detected an error with a value of <temperature> degrees Celsius."

This article outlines the response from VxRail Engineering to the Apache Log4j Remote Code Execution Vulnerability issue known as Log4Shell. This is described in CVE-2021-44228, CVE-2021-45046, and CVE-2021-4104 (Dell article DSN-2021-007, VMware article VMSA-2021-0028)

This checks the Domain name system (DNS) entries in the settings database against the "resolv.conf" file, to ensure the entries match.

Gathering the stats.db files helps with diagnosis of VxRail performance cases and should be uploaded for offline analysis.

The health-check 'vc_pw_char' verifies that the password matches VMware rules, if the credentials cannot log in to vCenter.

Dies ist ein Wissensdatenbank-Artikel mit der Anleitung zum Upgrade eines externen vCenter vor dem Upgrade des VxRail-Clusters.

VCF has disconnected account from ESXi node account for root and built-in service account.

During Day 1 VxRail installation, enabling vSphere Lifecycle Manager fails because the VxRail Manager cannot prepare certificates. The failure is caused by a blocked SSH connection on TCP port 22 between VxRail Manager and the customer vCenter.

Beim Upgrade von VxRail von 7.0.2 auf 8.0+ schlägt es möglicherweise in Phase 2 des Upgrades von vCenter mit der Vorabprüfung "vSphere ESXi Dump Collector Ports" fehl.

During an upgrade from versions earlier than 8.0.210 to 8.0.300+, the process hangs at the post‑upgrade health‑check stage because required network ports are blocked, leading to timeouts and failure.

The VxRail plug‑in creates iDRAC users with simple passwords that violate the iDRAC password policy, causing the privilege to appear as "idrac.users.role.UNKNOWN" and preventing login. The issue stems from a mismatch between iDRAC UI validation and API behavior in VxRail 8.0.320.

This article explains how to reset the vCenter Server Appliance (VCSA) root password without rebooting for versions 7.x and 8.x, covering SSH access, shell enablement, account unlock, password change, and verification.

Event code: VXR508CTL13 This event code indicates "The <Controller name> cache has been discarded."

Event code: VXR508CTL215 This event code indicates "Redundant path disconnected on <Controller Name>."

Bei der Eingabe der Zugangsdaten und Einstellungen während eines Upgrades kann aufgrund eines ungültigen Kennworts für das Managementkonto nicht mit dem nächsten fortgefahren werden.

Event code: VXR508ENC4 This event code indicates "<Enclosure Name> firmware mismatch."