PowerScale OneFS

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

The Dell PowerScale OneFS Info Hubs provide links to OneFS documentation.

On an Isilon node, during a firmware upgrade, the InstallFirmware operation aborts, logging an IOError Errno 54 caused by a Remote Procedure Call (RPC) session disconnection.

This KB article addresses a rare issue where the SyncIQ scheduler process (isi_migr_sched) is not running.

Certain OneFS 8.x releases may leave a node’s LED amber after the event group shows as ended.

FSAnalyze fails with "New entry does not match existing entry for key: File exists."

On OneFS 8.0, the firmware update process will fail if the BMC/CMC subsystem is unresponsive. Sometimes the warning event to indicate this condition is not generated.

When adding a replacement drive to a node, the add operation may fail with the message "The add operation failed. An unrecognized drive was found in bay <#>. To format this drive and add it to the file system, run 'isi devices -a format' on this drive and follow the instructions provided."

The OneFS event 'Physical Memory low (expected xxxGB, found yyyGB)' indicates either a defective DIMM module in the node, or a problem with the node's configuration.

If you receive STATUS_TIMEOUT events in CELOG alerting from one or more CEE servers, this KB is designed to assist in understanding the events and help identify the cause.

This "How to" article explains the process to setup and run internal_ping script to test the back-end mesh connectivity for both Ethernet and InfiniBand networks.

How to configure ssh to listen on multiple ports in OneFS 8.2 and newer releases.

How to move the admin home directory.

This article describes how to use the isi ftp command to configure access to directories on the cluster for users connecting using FTP.

This article describes how to collect basic switch information using packet capture tools.

Older HealthCheck versions contain a defect that can trigger Internet Control Message Protocol (ICMP) pings to SyncIQ targets that never stop. When this occurs, a new ping process is started for each time the check runs for every SyncIQ policy, and these processes continue indefinitely. Over time, these accumulated ping processes can generate a high volume of outbound network traffic from the PowerScale cluster. In prolonged scenarios, this may lead to increased network utilization, congestion, and potential packet loss.

cluster_stats can be sizable and lead to Secure Remote Services (Secure Remote Services) backend outages or delays. This is the process to disable the cluster_stats from running every 5 minutes overwhelming Secure Remote Services.

Steps to renew or replace the SSL Certificate for the OneFS web administration interface.

OneFS does not automatically select LIN-based jobs in situations where it would be more efficient to run them. This Knowledge Base explains when LIN-based jobs are more effective.

Files are not sorted alphabetically when using DOS dir commands.

The Windows (DOS) ReadOnly flag on a directory prevents macOS using Apple Extensions over SMB from writing to the directories.

Users are denied access to shares that they should otherwise have access to and are presented with the following message: {Audit Failed} An attempt to generate a security audit failed.

This article explains how to use the Isilon OneFS isi_auth_expert command to manage authentication.

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

The ChangelistCreate job fails if the configured MetadataIQ path has an ADS flag.

Dell PowerScale OneFS remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

This article provides an overview of the PowerScale OneFS upgrade process.

An update to the trusted root Certificate Authorities (CAs) is being issued to maintain the security and integrity of the product update infrastructure.

What is Traverse checking, how does it work, and how do you enforce it in OneFS?

This KB article discusses how snapshots may remain on a cluster after their expiration period has passed.