Connectrix MDS-9250i

This document highlights minimum, recommended, and latest code versions for Dell Technologies Enterprise and Datacenter Infrastructure products. We carefully evaluate and monitor code deployment data to ensure that product releases meet our stringent expectations to provide our customers with reliable products and solutions.

M3 line card may be reset after system reports EOBC heartbeat failure:

The Simple Network Management Protocol (SNMP) service stops with 'signal 6' type.

Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.

Connectrix: IP_FCMAC_CNT_STATS_ERRORS_RX_BAD_WORDS_FROM_DECODER on admin down port

Dell Connectrix MDS Cisco remediation is available for CLI vulnerability that could be exploited by malicious users to compromise the affected system.

IPStorage interface was down due to Port software failure.

Dell Connectrix (Cisco) MDS DCNM remediation is available for an NX-OS vulnerability that may be exploited by malicious users to compromise the affected system.

Dell Connectrix (Cisco) remediation is available for multiple Spring vulnerabilities that may be exploited by malicious users to compromise the affected system.

Dell Connectrix Cisco MDS 9000 Switches remediation is available for the Cisco Discovery Protocol service of Cisco NX-OS Software that may allow an unauthenticated, adjacent attacker to cause the service to restart, resulting in a denial of service (DoS) condition.

Dell Connectrix Cisco MDS 9000 Switches remediation is available for NX-OS Software that may be exploited by malicious users to compromise the affected system.

SCG, Base64 encoding, Cisco, ESRS script, password Base64 Encoding

Cisco MDS: Unexpected reboot of MDS 9250i/9148s

Affected products after NX OS 9.4.2a upgrade: Cisco MDS 9000 NX-OS and SAN-OS Software, Cisco MDS 9100 Series Multilayer Fabric Switches, Cisco MDS 9200 Series Multiservice Switches, Cisco MDS 9300 Series Multilayer Fabric Switches, Cisco MDS 9500 Series Multilayer Directors, Cisco MDS 9700 Series Multilayer Directors

How to perform NX-OS upgrade on the MDS switches

This vulnerability is deducted without any Qualys ID (QID) or CVE identifier with description Weak TLS or SSL key exchange vulnerability.

This article explains how to configure TACACS on a Connectrix MDS switch.

How to configure call home email alerts into a readable format on an MDS switch.

Domain IDs uniquely identify a switch in a Virtual Storage Area Network (VSAN). A switch may have different domain IDs in different VSANs. The domain ID is part of the overall Fibre Channel (FC) ID. The configured domain ID can be preferred or static. By default, the configured domain ID is 0 (zero) and the configured type is preferred. Domain IDs can range from 1 to 239. The 0 (zero) value can be configured only if you use the preferred option.

MDS 9250i or MDS 9148S spontaneously reloads or loses management connectivity.

After ip switch maintenance, the adjacent MDS IPS port for fcip may be stuck in an initializing state.

Dell Connectrix MDS (Cisco) remediation is available for multiple third-party component vulnerabilities that could be exploited by malicious users to compromise the affected system.

The Connectrix MDS Temperature sensor shows the status as unknown.

NVRAM health status is not displayed in Connectrix MDS.

Dell Connectrix Cisco MDS 9000 Series remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

Dell Connectrix NX-OS remediation is available for the Link Layer Discovery Protocol (LLDP) vulnerabilities that could be exploited by malicious users to compromise the affected system.

This article details how to configure Cisco MDS and Nexus switches to send periodic inventory messages.

Dell Connectrix MDS-Series remediation is available for the Bootloader that could be exploited by malicious users to compromise the affected system.

This issue is seen when the audit logs are getting filled for the switches, receive notification email alerts from the switches, or when any switch is idle for some time and no events are generated.

Dell Connectrix Cisco MDS 9000 Series remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.