PowerPath/VE for VMware

A slow blinking amber light showing internally from the switch model DS6620B-V2, not from the switch panel, is confirmed by Brocade to be the LED from the eUSB card (on the motherboard).

PowerPath/VE: How to remove old dead path entries for NVMe devices from ESXi 8.x

Explore the Dell End of Service Life (EOSL) and End of Life (EOL) list for converged infrastructure, storage, and storage networking products. Access End-of-Life documents for hardware, software, and firmware release and service dates

When you downgrade PowerPath from 6.x to 5.x, you need to put aside the PowerPath 5.x saved configuration files in advance.

This article provides the fix when the Windows host cannot see LUNs on Unity Array after installation of PowerPath 6.1.

Event 4 appears in Viewer, reporting Corporation () PowerPath MPAPI error after upgrade to 5.7 SP2. MPAPI (Powermt, host-agent, Powermig) causes error. No impact on PowerPath cluster.

When PowerPath for Windows version 6.1 is installed on Windows Server 2016, validation alerts indicate many drivers have dates earlier than the OS, because the PowerPath release predates the OS.

This article notes how PowerPath on Red Hat Enterprise Linux 2.1 or 3 can cause SAN access conflicts and block storage software. The cause is the PowerPath driver and services.

PowerPath Management Appliance contains remediation for OpenSSL vulnerability that may be exploited by malicious users to compromise the affected system. PowerPath Linux remediation is available for OpenSSL Vulnerability with an updated Security Configuration Guide (SCG) informing the customers to update OpenSSL package on the host system. For PowerPath Windows, OpenSSL_Configuration Utility contains remediation for OpenSSL vulnerability that may be exploited by malicious users to compromise the affected system. OpenSSL is used for communication between PowerPath Windows host and Management server. OpenSSL is not bundled in PowerPath Windows package. However, separate compiled OpenSSL libraries are provided to customers through Dell download site along with an installation script so that customers can install them separately. As a remediation, PowerPath engineering is updating the download site with the latest OpenSSL libraries.

LU reset by VMware ESXi

This article explains how to assign an Initial Company Administrator.

The purpose of this KB article is to provide common information about ESXi issues and the steps to troubleshoot them.

PPME migration seems to have hung Disk Management and PowerPath 6.2 on the B node of an Active/Active cluster. Node A is the one that has 10 handles setup (no sync yet) but node B is showing high I/O across all disks for some reason.

VMware ESXi #PF Exception 14

When the host is rebooted, NMP manages some or all VPLEX LUNs (instead of PowerPath/VE).

What is the maximum number of LUNs (Logical Unit Number) that can be presented? What is the maximum number of Paths per LUN? What is the Maximum Partition size on Microsoft Windows?

This article explains how to promote Company Administrators.

Server hung while PPME migration was in progress at which TargetLUfault errors are received in powermig info.

A administrator has, by mistake, applied a license to a server which already had a license. Attempt to get the license back with "lmremove" fails with "lmremove: Cannot remove a linger license. (-100,398)"

PPMA shows ESXi hosts as Unlicensed and rpowermt commands fail with an error "User Authentication Invalid"

Duplicate LUNs presented to server causing PPVE error messages

During SRM operations a hostd worker encounters a situation where it is waiting on a lock held by PowerPath.

PF Exception 14 in world MpxTestDaemo MpxConsiderPathForIo during APD situations

Microsoft Failover cluster resources go offline during a volume expansion in PowerPath for Windows 6.1.

VMware ESXi 8.0 U3 Purple Screen of Death (PSOD) due to the reference of an unsupported entry point in the vmk_PsaStorMPPluginSpecific Struct.

While other luns are correctly discovered down all the paths, lun 0 is missing paths or is not visible at all.

Because there is no "rpowerrmt remove" command, an alternate method needs to be used to isolate a path for maintenance without generating errors while the path is being tested.

PPVE 6.6 supports VM count/info only for ESXi 6.7 & above and it throws warning message for ESXi 6.0.x and ESXi 6.5.x.

Upgrade to PPMA 2.1 SP1 or above from lower version fails

Kernel panics may occur on Red Hat Enterprise Linux (RHEL) 7.x systems running PowerPath for Linux version 6.3 in conjunction with Symantec software (VRTSvxvm any version) may result in data unavailability.