iDRAC10 - 1.20.xx Series

This article provides a high-level explanation for updating the BIOS and iDRAC10 firmware versions for 17th generation PowerEdge servers.

This article details the most recent firmware version for Integrated Dell Remote Access Controller 10 (iDRAC10), designed for Dell PowerEdge servers from the 17th generation onwards.

After firmware upgrade of iDRAC9 & iDRAC10 to v7.20.60.50 & v1.20.70.50 respectively, the real-time temperature is not displayed in OpenManage Enterprise 4.5.x.

Starting with iDRAC version 7.20.60.50, the Integrated Dell Remote Access Controller (iDRAC) UI no longer includes the iSM install button on the iSM setup page. This change reflects the deprecation of the feature that previously allowed installation of iDRAC Service Module (iSM) using iDRAC.

This article provides the information about the Integrated Dell Remote Access Controller (iDRAC10).

Learn how to create and export a SupportAssist Collection using iDRAC9 and iDRAC10 on Dell devices. Resolve technical issues with this step-by-step guide.

This article explains how to use iDRAC Direct to manage your PowerEdge server.

When the user executes the IPMItool chassis status command (in-band or out-of-band), the output incorrectly indicates ‘Drive Fault’ and ‘Cooling/Fan Fault’ as true, even though no faults are present on the server.

Deploying a template with the virtual disk configuration set to action ‘CREATE’ fails with the error: "Unable to create a virtual disk due to an invalid combination of span count or number of disks specified for the selected RAID level"

This article provides links to download Dell trial 30 and 90-day evaluation license collection including iDRAC Enterprise, iDRAC Datacenter, Chassis Management Consoles (CMC) Enterprise, OpenManage Enterprise, and OpenManage Integration.

This article provides general information about how to view and monitor server health from the IDRAC10 web interface.

Dell PowerEdge 17G Intel servers may record memory module temperature warning events in the Lifecycle Log and System Event Log during the server cold boot sequence.

Dell PowerEdge 17G servers record inaccurate CPU index within iDRAC10 Lifecycle Log (LCLOG) and System Event Log (SEL) when machine check event (MCE) is recorded.

Dell PowerEdge 17G servers added MEMHOT error monitoring in iDRAC10 firmware version 1.20.80.50 combined with supported Field-Programmable Gate Array (FPGA) firmware. Servers configured with Power Supply Cold Redundancy feature enabled can record random SYS565 memory temperature warning events.

Dell iDRAC9 and iDRAC10 remediations are available for an arbitrary file export vulnerability that could be exploited by malicious users to compromise the affected system.

Dell PowerEdge R670 and R770 servers cannot apply any firmware updates when BIOS 1.0.1 is present on a server with iDRAC10 controller.

This KB provides information about the tasks you must perform to set up iDRAC10 IP address and log in to iDRAC10.

When SNMPwalk is run against OID .1.3.6.1.4.1.674.10892.5.4.600.20.1.5.1 on iDRAC10, a status code of 2 (Unknown) on firmware version 1.20.25.00 and 1.20.50.50 is returned.

iDRAC10 when using Generic Lightweight Directory Access Protocol (LDAP) authentication fails when connecting to Identity Policy Audit (IPA) directory servers.

Dell PowerEdge 17G servers that shipped before March 24, 2025 will prompt for Liquid Cooling capability after updating iDRAC10 firmware.

Dell OpenManage MIBs version 11.1.0 is the final release of an effort to consolidate SNMP MIB files defining various Dell server components.

iDRAC10 authentication or authorization with Directory Service accounts is not working under certain conditions.

iDRAC10 firmware version 1.20.50.50 was removed from Dell Technologies' eSupport downloads website due to two high impact issues. This article outlines those issues and remediation plans.

In iDRAC10 firmware version 1.20.5x.xx, a functional change prevents the server from announcing itself. As a result, server-initiated discovery is not supported with this firmware version.

Dell iDRAC10 remediation is available for multiple security vulnerabilities that could be exploited by malicious users to compromise the affected system.

Dell iDRAC10 remediation is available for an OpenSSH vulnerability that could be exploited by malicious users to compromise the affected system.

Dell Connectivity Client for PowerEdge is a lightweight software plug-in installed on the integrated Dell Remote Access Controller (iDRAC). As of December 2024, DCC is factory installed on the iDRAC of Dell PowerEdge 15th, 16th, and 17th generation servers.