SUSE Linux Enterprise Server 15

A group of disclosed vulnerabilities in GRUB (Grand Unified Bootloader), known as "BootHole", can allow for Secure Boot bypass.

On Dell PowerEdge 17G servers using Broadcom 5719 QP OCP NX1 cards (DPN M2PYY), firmware installation fails when Secure Boot is enabled on SUSE Linux Enterprise Server (SLES). Additionally, the installed firmware version is not detected by the Operating System (OS). Disabling Secure Boot allows the firmware to install and be detected correctly.

Customers may encounter package update failures when using Linux OS to perform the Dell Update Package (DUP) as a binary (.BIN) file.

Information about how to install SUSE Linux Enterprise Server on Dell PowerEdge Servers.

The issue is cosmetic. There is no functional impact. The lspci -v command requires certain labels to read. Labels are missing from the current Basic Input Output System (BIOS) but are added to June block BIOS v2.2.4.

On the PowerEdge R940 server running Ubuntu 20.04 or RHEL 7 and 8 Operating Systems, the Network Interface Controller (NIC) naming has an inconsistency compared to other Dell 14G or 15G PowerEdge servers.

When attempting to join a node to an existing Linux cluster, getting a "warning: csync2 run failed - some files may not be sync'd" and "error: cluster.join: [Errno 2] No such file or directory: '/etc/corosync/corosync.conf' messages

iDRAC Service Module (iSM) 5.2.0 and earlier on any supported Linux version fails to start its service with a SEC0704 error logged if the install path of its binaries contains a symlink to a different path. Alternative install paths are not accepted by iSM’s own binary verification system.

Beginning with the Windows 11 May CI upgrade, Microsoft enables Smart App Control (SAC) to further strengthen the security on Windows 11 devices.

The steps listed below explain how to locate the serial number, vendor, firmware version, and physical slot mapping of an SAS/SATA/SSD hard drive on PowerEdge servers running Linux Operating System or from the gathered SOS report.

Red Hat system not booting and goes into maintenance mode due to the Virtual File Allocation Table (vfat) module blacklisted.

Reported vulnerability with Nessus scan: "Unix Operating System Unsupported Version Detection: SUSE Linux Enterprise 15.0 support ended on 2019-12-31 (end of regular support) / 2022-12-31 (LTSS option). Upgrade to SUSE Linux Enterprise 12.5 / 15.1."

This article discusses R7425, R6415, R7415 14G AMD servers with Linux OS using H330 controllers or ESXi using H330 configured as VMDirectPath I/O pass-through to a Linux Virtual Machine with the potential to experience data corruption.

This article describes operating system recovery options available in Windows 11 SE.

With OMSA 10.3 and older specifying the CLI command to set up an alertaction to launch a specific binary or shell script may result in an "XML Transformation failed" error with the execappath option.

This article describes how to enable the Amazon Appstore Preview on Windows 11.

OpenManage Server Administrator 10.1.0 for RHEL7, RHEL8, and SLES15 requires the 10.1.0.1 patch for specific 15G, 14G Intel, and AMD PowerEdge platforms that now ship with or have parts replaced with revised PERC 10, PERC 11, and Host Bus Adapter (HBA) controllers due to supply chain issues. Since these revised controllers only support specific server models, the OMSA 10.1.0.1 patch cannot be posted to the Dell Linux repository and must be installed separately.

This article provides information about Wi-Fi 6E not supported on client Linux Operating System (OS).

Explore this article to troubleshoot wireless networking for your home network on Windows 11. Also, for help with setting up, connecting, sharing files, photos, music, and troubleshooting your wireless network see the appropriate section.

Vulnerabilities in GRUB (Grand Unified Bootloader) may allow Secure Boot bypass.

Caps Lock does not function as expected when the system is in text mode and the system is being accessed using iDRAC Virtual Console.

Steps for getting printing to work on Red Hat and SUSE Linux.

Explore the Windows 10 Magnifier Tool and its modes: Full Screen, Lens, and Docked. Check how to switch between these modes to enhance screen magnification and functionality on your Windows 10 system.

This article provides information about how to test available network bandwidth using iperf3.

This article provides Dell guidance for a VPD access failure message with Broadcom BMC 5720 and SLES 15 operating system. The VPD access failure message may be logged in the dmesg log file. This article provides guidance for this error message.

This article explains the procedure to open a Service Request (SR) using the Dell support page. Get help fast for your Dell device. No more waiting on hold. No more tech headaches. Dell makes it simple to fix problems, schedule repairs, or get support—right from your device or our support website.

The SYMMQRY for z/VM utility provides the Symmetrix serial number from any z/VM disk, minidisk, or volume. The SYMMDEV#, Count Key Data (CKD) device information, and Enginuity level is also obtained from the SYMMQRY.

vCenter web console repeatedly shows the message "Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)" when attempting to upgrade Suse Linux from SLES 12 SP5 to SLES 15 SP4 on a remote collector.

This article provides information about how to use the LCC to deploy a supported OS.

What is a Zombie Process, how to find it, and how to kill or terminate it.