Connectrix B-Series Software

En este documento, se destacan las versiones de código mínimas, recomendadas y más recientes para los productos de infraestructura empresarial y de centro de datos de Dell Technologies. Evaluamos y monitoreamos cuidadosamente los datos de implementación de códigos a fin de garantizar que los lanzamientos de productos cumplan con nuestras estrictas expectativas para proporcionar a nuestros clientes productos y soluciones confiables.

En este artículo de la base de conocimientos, se proporcionan los pasos para reemplazar un miembro de zona.

No se puede importar la política de MAPS mediante BNA en el switch SAN.

¿Cómo recuperar una ranura de un mensaje EM-1045, CHASIS, ADVERTENCIA, la ranura XX se está apagando (no hay suficiente energía)?

The switch user does not have privilege to access all possible VFs.

Procedure to customize the chassis name.

After upgrading to Fabric OS (FOS) 9.1.1c, unable to run inline commands from UNIX or Linux server to the switch with the "fosexec" commands.

A slow blinking amber light showing internally from the switch model DS6620B-V2, not from the switch panel, is confirmed by Brocade to be the LED from the eUSB card (on the motherboard).

Learn how to use PuTTY for SSH key-based authentication. Step-by-step instructions to create SSH keys, add SSH key to PuTTY, and connect with SSH key securely on Connectrix B-Series.

This KB provides steps to rename a zone object. You can use these steps for all zone object types, including cfgs, zones, and aliases.

The seccermgmt cert shows error "Is an unknown x509 format."

Comprobación de compatibilidad de CONNECTRIX B-Series FOS con agentes de SMI-S

La salida configupload se genera automáticamente con el sufijo switchname en lugar del nombre de archivo proporcionado por el usuario.

When the active ports have exhausted the current POD license pool, additional ports will not be assigned a license. In such cases, manually move licenses from unused ports by releasing the POD assignment to a newly used port and reserve it. FOS 9.x and above

This issue is seen while the backed-up switch configuration has been loaded to the switch using the configdownload command.

AES256-SHA256 (0x3d) y AES128-SHA256 (0x3c) están bloqueados para TLS.

Fabric OS 9.1.0 introduces the Fibre Channel Link Aggregation (FC-LAG) feature to provide FC-LAG capability between Brocade switches and Cisco UCS FIs that are configured in end-host mode.

No se pueden realizar cambios en la configuración de zona desde ningún switch del fabric.

Connectrix Brocade: The new switch was not joining the fabric with an alert "FDD conflict - Strict Fabric Wide policy conflict" when the configured Security Policies failed to merge.

Switch policy status is critical due to WWN_DOWN.

OpenSSH public key authentication provides password-less logins, known as SSH authentication that uses public and private key pairs for incoming authentication. Any admin user can perform incoming Open SSH public key authentication.

Chassis triggered TRUFOS_CERT_DAYS_TO_EXPIRE rule "defCHASSISTRUFOS_CERT_DAYS_TO_EXPIRE_60."

DCX8510-8B rebooted with error "Processor rebooted - Reset"

wwpn of the connected device is not displayed correctly showing 0s.

How to disable the ISLs if no longer required

Unexpected switch reboot due to "Processor rebooted - Software Fault: ASSERT"

Learn how the MyService360 services analytics dashboard integrates the Dell AIOps (formerly CloudIQ) Health Score into the Install Base views. This integration streamlines services and product health management by IT admins using the MyService360 and Dell AIOps portals. Verify supported products by portal and access helpful Dell AIOps resources.

No se pueden agregar LUN más allá de los 256 actuales en los servidores dentro del dominio de UCS.

This KB article is to explain on how to add Gateway IP while using IPV6 using CLI and WebTools.

Around December 2022 the Ports On Demand (POD) kit license activation process changed.