APEX Cloud Platform for Red Hat OpenShift

En este documento, se destacan las versiones de código mínimas, recomendadas y más recientes para los productos de infraestructura empresarial y de centro de datos de Dell Technologies. Evaluamos y monitoreamos cuidadosamente los datos de implementación de códigos a fin de garantizar que los lanzamientos de productos cumplan con nuestras estrictas expectativas para proporcionar a nuestros clientes productos y soluciones confiables.

AIOps de Dell (anteriormente CloudIQ) es una aplicación basada en la nube que proporciona monitoreo y solución de problemas simples y proactivos de su infraestructura de TI de Dell, incluida la integración con VMware. Aprovecha el aprendizaje automático para monitorear y medir proactivamente el estado general de los servidores, el almacenamiento y los switches a través de un análisis predictivo, inteligente e integrales. Las AIOps de Dell están disponibles sin cargo adicional para los productos Dell cubiertos con un contrato ProSupport (o superior) válido.

LCM failed during node reboot due to CSI controller pod and depot manager pod run into deadlock.

In disconnected environment (cluster in restricted networks or without internet connection), when a user tries to remove a node via Dell APEX Cloud Platform web console plugin, the process fails at step "Check if the node had bare pods".

One control plane node is non-gracefully shutdown, after it is powered on, it will go to "not ready" state and cause the cluster not operational.

If user set MTU for management traffic during cluster deployment or node addition process, corresponding MTU on physical switch ports needs to be set as well, otherwise network validation will fail.

The VM cannot be created via OpenShift Virtualization if no default StorageClass exists in OCP cluster. Because non-default StorageClass cannot be selected for rootdisk or for the user added disks.

Due to OpenShift Virtualization limitation, VM cannot be cloned if it has disks with "hotpluggable" option enabled.

Node is unreachable.

PersistentVolumeInodes are filling up.

Filesystem is predicted to run out of inodes within the next 4 hours.

Filesystem is predicted to run out of space within the next 4 hours.

System Memory Exceeds Reservation

PersistentVolume is filling up.

Clock not synchronising.

PersistentVolume is having issues with provisioning.

Pod container waiting longer than 1 hour

etcd cluster database is running full.

Reloading an Alertmanager configuration has failed.

An API Server had an error writing to an audit log.

Filesystem has less than 3% space left.

Take VM snapshot via OpenShift Virtualization UI fails if there is IO running in the VM in OCP cluster.

Add worker nodes via Dell APEX Cloud Platform node addition function, the newly added nodes hardware information is missing on the Red Hat Web Console Node Details view page.

This KB introduces some potential reasons that can cause OCP nodes rebooting failure during updating the OCP ingress certificate and provides suggested prechecks to mitigate the potential failure.

An iDRAC issue causing cluster deploy failure, the firmware and hardware inventory information cannot be returned from iDRAC.

OCP upgrade precheck failed for dryrun drain node error, due to some VM cannot be live migrated or some pod cannot be evicted.

OCP upgrade post check error for node not ready or scheduling disabled due to VM configured with ReadWriteOnce(RWO) storage volume that cannot be live migrated.

ACP for Red Hat OpenShift may have a failure during LCM Percheck when upgrading to a newer version. There are multiple scenarios below for a resolution

En este documento, se proporciona orientación sobre cómo evitar que Dell APEX Cloud Platform (ACP) sobrescriba ConfigMaps para Red Hat OpenShift.

En este artículo, se describe el procedimiento para aumentar los búferes de anillo RX en las interfaces de cada nodo trabajador en un clúster de plano de control alojado (HCP) de OpenShift Container Platform (OCP).