VxRail E660F

Ce document met en évidence les versions de code minimum, recommandé et le plus récent pour les produits Dell Technologies Enterprise et Datacenter Infrastructure. Nous évaluons et surveillons scrupuleusement les données de déploiement de code afin de nous assurer que les versions de produits répondent à nos attentes les plus strictes visant à fournir à nos clients des produits et solutions fiables.

Cet article rassemble les questions, les réponses et les informations relatives aux mises à niveau de VxRail.

Event code: VXR500FAN0020 This event code indicates "The <fan name> is non-functional."

Event code: VXR500ENC23 This event code indicates "<enclosure name> - Issue with PHY <PHY data>."

Event code: VXR500AMP405 This event code indicates "The <sensor name> sensor state has changed to a failed state with a value of <current> A."

Event code: VXR500ENC3 This event code indicates "<Enclosure Name> is shutdown."

Event code: VXR500FAN8503 This event code indicates "The Chassis was turned off because more than two internal fans stopped functioning."

Event code: VXR500CBL0002 This event code indicates "Backplane <bay ID> signal cable disconnected."

Event code: VXR500CBL0006 This event code indicates "Unsupported backplane <bay ID> configuration: Multiple RAID controllers cannot be connected to the same backplane."

Event code: VXR500CBL0005 This event code indicates "Backplane <bay ID> <connector name> connector incorrectly connected to the motherboard SATA controller."

Event code: VXR500FAN0015 This event code indicates "<fan name> RPM is greater than the upper critical threshold."

VxRail: Event Code: VXR500ENC24 This event code indicates "Communication with <enclosure name> is intermittent."

Event code: VXR500CBL0007 This event code indicates "Backplane <bay ID> <cable name> cable and backplane <bay ID> <cable name> cable are swapped."

Event code: VXR500CBL8500 This event code indicates "SAS cable <cable id> to expander <expander id> is not connected."

Event code: VXR500CBL0001 This event code indicates "Backplane <bay ID> power cable disconnected."

VxRail: Event Code: VXR500ENC100 This event code indicates "<enclosure name> is sending inconsistent responses to the controller."

Event code: VXR500FAN0022 This event code indicates "The <sensor name> sensor has failed, and the last recorded value by the sensor was <fan speed> RPM."

Node expansion fails due to issues in the VxRail RADAR engine.

Ce document rassemble les questions, les réponses et les informations relatives aux mises à niveau de VCF sur VxRail avec RPS.

Code de l’événement : VXR500IOV118 Ce code d’événement indique « Fabric <fabric ID> est en panne.

Event code: VXR500ENC2 This event code indicates "<Enclosure Management Module Name> was removed."

Event code: VXR500IOV2008 This event code indicates "The Chassis Management Controller (CMC) is unable to communicate with the PCIe subsystem."

Event code: VXR500LNK0001 This event code indicates "Network share name unavailable."

Event code: VXR500IOV111 This event code indicates "Unable to update Chassis Infrastructure firmware."

Event code: VXR500NIC017 This event code indicates "Unable to delete vFlash pending one-time boot configuration"

Event code: VXR500LNK0004 This event code indicates "Unable to connect to FTP server."

Event code: VXR500FC002 This event code indicates "Unable to allocate memory."

Event code: VXR500IOV112 This event code indicates "Chassis Infrastructure firmware is not valid."

Event code: VXR500LNK0002 This event code indicates "Unable to resolve host name."

La mise à niveau de Lifecycle Manager (LCM) échoue à l’étape Appliquer la clé de licence vCenter Server.