Removal
Cover
Identify the cover highlighted in blue.
Pull the release latch to release the cover.
Rotate the cover and lift the cover to remove it from the computer.
PSU hinge
Identify the power supply unit (PSU) hinge highlighted in blue
Unlock the release tabs on the back of the system
Rotate the power supply unit hinge up to an open position.
Graphics card
Identify the full length graphics card highlighted in blue.
Lift to release the bracket from the system.
Disconnect the power cables from the full length graphics card.
Push the retention tab to release the graphics card.
Grasp the graphics card by its top corner and ease it out of the slot.
Solid state drive (SSD)
Identify the solid state drive (SSD) highlighted in blue.
Remove the screw that secures the solid state drive to the system board.
Slide and lift the solid state drive off the system board.
Install
Solid state drive (SSD)
Identify the solid state drive location (SSD) highlighted in blue.
Align the notch on the solid state drive with the tab on the solid state drive slot.
Install the screw that secures the solid state drive to the system board.
Graphics card
Identify the full length graphic card location highlighted in blue.
Place the card into the slot and press down firmly until the full length graphics card snaps into place.
Rotate the release latch inwards to lock the graphics card.
Connect the power cables to the full length graphics card.
Slide the tab on the bracket into the slot on the system and snap it into place
PSU hinge
Identify the power supply unit (PSU) cage highlighted in blue.
Rotate the power supply unit cage downwards into the system.
Lock the release tabs to secure the power supply unit hinge to the system.
Cover
Identify the cover location highlighted in blue.
Align the hooks on the cover with the tabs on the chassis of the computer.
Rotate the cover until it clicks into place.