How to replace the Front Bezel on a Precision 7875 Tower

This 3D experience gives you the step by step process of replacing the Front Bezel and a Precision 7875 Tower. The procedure will also include removing the Side Cover, Front Bezel - Hard Drive and reinstalling them.

Removal

Side Cover

1. Identify the side cover highlighted in blue.
2. Unlock the side panel latch using a Phillips screwdriver.
3. Press to open the latch of the side cover. Pull the release latch to release the side cover from the chassis.
4. Open the side cover at an angle and lift the cover away from the chassis.

Front Bezel - Hard Drive

Front Bezel

1. Identify the front bezel highlighted in blue.
2. Gently pry the retention tabs to release the front bezel from the chassis.
3. Rotate the front bezel outward from the chassis and remove the front bezel.

Install

Front Bezel

1. Identify the front bezel location highlighted in blue.
2. Align the front bezel tabs with the slots on the chassis.
3. Install and rotate the front bezel towards the chassis, then snap it into place.

Front Bezel - Hard Drive

Side Cover

1. Identify the side cover location highlighted in blue.
2. Align the tabs with the slots and install the side cover on the chassis.
3. Using a Phillips screwdriver, turn the side panel latch to the locked position.