Removal
Base Cover
Identify the base cover highlighted in blue.
Loosen the captive screws that secure the base cover to the computer.
Pry open the base cover starting from the bottom right corner of the base cover.
Lift the base cover starting from the bottom edge and push it towards the rear to remove it from the system.
Memory Module
Identify the memory module highlighted in blue.
Pry the securing clips from both side of the memory module until the memory module pops up.
Remove the memory module from the memory module slot.
Memory Interposer Board
Identify the memory interposer board highlighted in blue.
Remove the screws that secure the memory bracket to the memory interposer board.
Lift the memory bracket off the memory interposer board.
Remove the screws that secure the memory interposer board to the system board.
Remove the memory interposer board from the system board.
Remove the DIMM connecter module from the system board.
Install
Memory Interposer Board
Identify the memory module location highlighted in blue.
Place the DIMM connecter module on the system board.
Place the memory interposer board on the system board.
Install the screws to secure the memory interposer board to the system board.
Place the memory bracket on the memory interposer board.
Install the screws to secure the memory bracket to the memory interposer board.
Memory Module
Identify the memory module location highlighted in blue.
Align the notch on the memory module with the tab on the memory module slot.
Press the memory module down until it clicks into place.
Base Cover
Identify the base cover location highlighted in blue.
Slide the base cover into its slot until it clicks into place.
Tighten the captive screws to secure the base cover to the computer.