Removal
Base Cover
Identify the base cover highlighted in blue.
Remove the screws that secure the base cover to the system.
Loosen the captive screws that secure the base cover.
Using a plastic scribe, pry the base cover from the hinges around the outside to loosen.
Lift the base cover off the system.
SSD 2280
Identify the solid state drive (SSD) highlighted in blue.
Remove the screw that secures the SSD thermal shield and the SSD to the system.
Slide and lift the SSD thermal shield off the SSD.
Slide and lift the solid state drive (SSD) from the system board.
Install
SSD 2280
Identify the solid state drive (SSD) location highlighted in blue.
Align the notches on the solid state drive (SSD) and slide into the slot on the system board.
Install the SSD thermal shield on the solid state drive (SSD).
Install the screw that secures the SSD to the system.
Base Cover
Identify the base cover location highlighted in blue.
Align the base cover and press the edges of the cover until it clicks into place.
Tighten the captive screws that secure the base cover to the system.
Install the screws that secure the base cover.