Removal
Power Supply Units
Identify the PSU highlighted in blue.
Disconnect the power cable from the power source and from the PSU you intend to remove, and then remove the cable
from the strap on the PSU handle.
Press the orange release latch and slide the PSU out of the system by using the PSU handle.
System Cover
Identify the system cover highlighted in blue.
Turn the latch release lock to the unlocked position.
Press the cover release latch and remove the system cover.
Air shroud
Position the System as shown in video.
Identify the air shroud highlighted in blue
Holding the touch points at the center of the air shroud, lift the shroud from the system.
PIB
Install
PIB
Air shroud
Identify the cooling shroud location highlighted in blue
Align the tabs on the air shroud with the securing slots on the chassis.
Lower the air shroud into the chassis until it is firmly seated.
Position the System as shown in video.
System Cover
Identify the system cover location highlighted in blue.
Align the tabs on the system cover with the slots on the chassis.
Rotate the latch release lock clockwise to the locked position.
Power Supply Units
Identify the PSU location highlighted in blue.
Slide the PSU into the system until the PSU is fully seated and the release latch snaps into place.
Connect the power cable to the PSU, and plug the cable into a power outlet.