Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the captive screw that secures the side cover to the chassis.
Pull the release latch to release the cover from the chassis.
Lift the side cover from the chassis.
Rear Chassis Fan
Identify the rear chassis fan highlighted in blue.
Disconnect the fan cable from the connector on the system board.
Gently pull the rubber grommets to release the fan from the chassis.
Remove the fan from the chassis.
Install
Rear Chassis Fan
Identify the rear chassis fan location highlighted in blue.
Insert the rubber grommets on the chassis.
Align the slots on the fan with the rubber grommets on the chassis.
Route the rubber grommets through the slots on the fan and pull the rubber grommets until the fan snaps into position.
Connect the fan cable to the connector on the system board.
Side Cover
Identify the side cover location highlighted in blue.
Locate the tabs on the side cover and slots on the chassis.
Tighten the captive screw to secure the side cover to the chassis.