Removal
Side Cover
Identify the side cover highlighted in blue.
Loosen the captive screw that secures the side cover to the chassis.
Pull the release latch to release the cover from the chassis.
Lift the side cover from the chassis.
Intrusion Switch
Identify the intrusion switch highlighted in blue.
Disconnect the intruder cable from the connector on the system board.
Unroute the cable from the routing guide on the chassis.
Slide and remove the intrusion switch from the chassis.
Install
Intrusion Switch
Identify the intrusion switch location highlighted in blue.
Insert the intrusion switch into its slot and slide the switch to secure it into the slot.
Route the intruder cable through the routing guide on the chassis.
Connect the intruder cable to the connector on the system board.
Side Cover
Identify the side cover location highlighted in blue.
Locate the tabs on the side cover and slots on the chassis.
Tighten the captive screw to secure the side cover to the chassis.